Download Print this page

Important Safety Instructions; Parts List - Tripp Lite DWM2355S Owner's Manual

Full-motion flat-screen wall mount

Advertisement

Important Safety Instructions

• Read the entire instruction manual before you start assembly and installation. If you have questions about any of
the instructions or warnings, contact Tripp Lite Support.
• Use with products heavier than the rated weights indicated may result in instability, causing possible injury.
• Mounts must be attached as specified in these instructions. Improper installation may result in damage or serious
personal injury.
• Safety gear and proper tools must be used. This product should only be installed by professionals.
• This product is designed to be installed on wood stud walls, solid concrete walls or brick walls.
• Ensure the supporting surface will safely support the combined weight of the equipment and all attached hardware
and components.
• Use the mounting screws provided and DO NOT OVERTIGHTEN the mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and
personal injury.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months)

Parts List

IMPORTANT:
Before beginning installation, be sure you have received all the parts listed below.
If any parts are missing or faulty, contact Tripp Lite for replacements.
Components
A
Wall Plate/
Articulating Arm (x1)
CAUTION
B
VESA Plate (x1)
VESA Adapter
Bracket (x4)
D
Wall Plate
End Cap (x1)
C
H
Wrench
(x1)
2
E
F
Wall Plate
Nut
End Cap (x1)
(x4)
I
4 mm Hex
6 mm Hex
Key (x1)
Key (x1)
G
Bolt
(x4)
J

Advertisement

loading