SECO-LARM DH-151SQ Manual

SECO-LARM Magnetic Door Holders
Dimensions:
Magnet:
DH-151SQ:
Front Side
3
2 / "
4
(70mm) (76mm)
4 5 / "
8
(116.5mm)
DH-171SQ:
Side
2 1 / "
16
(52mm)
3
3 / "
8
(85mm)
1" 1 1 / "
16
(26mm)
(26mm)
LIMITED WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while
used in normal service for two (2) years from the date of sale to the original customer. from the date of sale to the original customer. SECO-LARM's obligation is limited to
the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO
is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or
alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such alteration, improper or abnormal usage, or faulty installation, or if for any oth
equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole equipment is not operating properly as a result of causes other than defects in material and workmanship.
obligation of SECO LARM and the purchaser's exclusive remedy, shall be limited to the replacement or LARM and the purchaser's exclusive remedy, shall be limited to the replacement or repair only, at
-
SECO-LARM's option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential LARM be liable for any special, collateral, incidental, or consequential
personal or property damage of any kind to the purchaser or anyone else. personal or property damage of any kind to the purchaser or anyone else.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is not responsible for misprints. Trademarks are the
property of SECO-LARM U.S.A., Inc. or their respective owners.
Copyright © 2016 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO-LARM.
®
SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA, 92606
Phone: (949) 261-2999 | (800) 662-0800
4
Armature:
Front
3"
2 9 / "
16
(65mm)
9
2
(65mm)
Side
Back
1 9
(40mm)
Door Installation
2"
1 9 / "
16
(51mm) mm) (40mm)
9
2 / "
16
(65mm)
1 3 / "
4
(45mm)
warranted against defects in material and workmanship while
d, transportation prepaid, to SECO-LARM. This Warranty
LARM is not responsible for misprints. Trademarks are the
Website: www.seco Website: www.seco-larm.com
Email: sales@seco-larm.com Email: sales@seco
SECO-LARM U.S.A., Inc.
/ "
16
/ "
16
3
1 / "
4
(44mm)
Features:
• For use with door closers to control the
release and closing of residential,
commercial, and public area doors
• Adjustable armature plate reduces
Installation time and adjusts to door
alignment changes
• Surface-mount or flush-mount
models available
• Fail-safe operation
• Low profile design
PITVW2
MI_DH-1x1SQ_160420.docx
Magnetic Door Holders Magnetic Door Holders
Manual
DH-151SQ
DH-151SQ Surface-
DH-171SQ Flush-mount
• Holding force Holding force – 33-lb (15kg)
• 3 voltages: 12/24 VAC/VDC, and 120VAC 3 voltages: 12/24 VAC/VDC, and 120VAC
• Extension bars available: Extension bars available:
(13mm, 19mm, 25mm, 50mm) (13mm, 19mm, 25mm, 50mm)
• Cast aluminum faceplate Cast aluminum faceplate
• No residual magnetism for easy release No residual magnetism for easy release
• Built-in voltage spike suppressor
• Use with SECO Use with SECO-LARM door closers
SD-C121 C121-S, SD-131-SQ, SD-C101-SGQ,
SD-C101 C101-SBAQ, or SD-C101-SBBQ
DH-171SQ
-mount
mount
1 / ", 3 / ", 1", 2"
2 4
in voltage spike suppressor