Download Print this page
IMG Group Nordic Star Base Assembly Instructions

IMG Group Nordic Star Base Assembly Instructions

Advertisement

Quick Links

BODY / STOL
I Body / Stol x 1
IV Screw / Skru M6 x 8
II Arms / Armlener
V Hex key / Umbraconøkkel x 1
x 1 pair / par
III Ottoman cushion /
VI Clip / Klips x 1
Taburett x 1
ASSEMBLY OF CHAIR AND OTTOMAN/
MONTERING AV STOLEN OG TABURETTEN
STEP 1
Put the chair on the base. Loosen the seat from the reclining mechanism.
You need to loosen the clip (VI) to do this.
TRINN 1
Sett stolen (I) ned på den ferdigmonterte kryssfoten. Løsne setet fra
glidebeslaget ved først å fjerne klipset (VI) plassert på tuppen av glidebeslaget for
så å ta ut bolten.
1
2
1
2
STEP 2
Place the top of the back down on the floor. Press the leather around the tabs
at the bottom of the back so that the tabs come visible. Fasten seat and back
together by sliding the holes (on the seat) into the tabs.
NOTE! One of the tabs is longer than the other to facilitate assembly.
TRINN 2
Legg toppen på ryggen ned mot gulvet. Trykk inn huden rundt tappene
nederst på ryggen slik at de kommer frem. Fest sete og rygg sammen ved å
skyve hullene på setets bakkant inn på tappene.
NB! En av tappene er lengre enn den andre for å forenkle monteringen.
Sett på klipset (IV) på den minste tappen på ryggen.
STEP 3
Attach the seat to the slide tube by inserting the pin through the holes on the
front of the seat and the slide tube. If necessary, turn the slide tube to the
correct position using a screwdriver. Insert the clip.
TRINN 3
Fest setet til gliderøret ved å sette bolten på plass igjen gjennom hullene
foran på setet og gliderøret. Om nødvendig vri gliderøret til riktig posisjon
med et skrujern. Sett klipset på plass.
STEP 4
Assemble armrests (II) by inserting screw (IV) half way into the arms. Put the
armrests on with screws sticking through the key-holes at the chairs steel arm.
Press the arm down and backwards while tightening the screws with hex key
(V).
TRINN 4
Monter på armlenene. (II) Skru inn skruene (IV) et par omdreininger inn i
armlenene. Sett dem ned på stolens stålarmer, slik at skruene tre er hullene.
Press armene ned og tilbake. Stram skruene.
3
STEP 5
Assembly ottoman by attaching ottoman cushion
(III) on the already assembled footstool base by
inserting screw M6 (IV) throught hole and using
hex key (V) to tighten all screws.
TRINN 5
Monter taburetten ved å feste puten (III) til det
ferdig-monterte understellet. Bruk skruer M6 (IV)
og stram skruene.
CONGRATULATIONS YOUR CHAIR AND OTTOMAN IS READY TO ENJOY.
NB : Please check bolts for tightness every six months or as needed.
GRATULERER! DIN NYE STOL ER KLAR TIL BRUK!
NB: Vennligst sjekk at skruene ikke har løsnet hver 6.
måned eller etter behov!
IMG recommends adding felt pads as an extra precaution beneath each
of the five legs on Star bases to prevent damage to flooring.
(VI)
IMG anbefaler at der brukes gode filtknotter under hver fot for å
click
beskytte underlaget.
IMG Group AS Postboks 251 N-6239 Sykkylven Norway
Tel: + 47 70 27 10 40 office@imgcomfort.no
imgcomfort.com
(VI)
click
(V)
CONGRATULATIONS /
GRATULERER
You are now the proud owner of a Nordic Star Base by IMG.
We are confident you will enjoy the comfort
and style of this new furniture.
Du er nå den stolte eier av en Nordic Kryssfot fra IMG.
Vi er sikre på at du vil nyte komforten
og stilen på dine nye møbler.
IMPORTANT / VIKTIG
Read this and other relevant instructions
before using the product. Keep this manual
for future reference.
Les denne og andre relevante instrukser
før du bruker produktet. Oppbevar denne
håndboken for fremtidig referanse.
042 INT NORDIC STAR BASE SQUARE BOX 2015.05

Advertisement

loading

Summary of Contents for IMG Group Nordic Star Base

  • Page 1 1 pair / par GRATULERER (VI) click You are now the proud owner of a Nordic Star Base by IMG. III Ottoman cushion / VI Clip / Klips x 1 We are confident you will enjoy the comfort Taburett x 1 and style of this new furniture.
  • Page 2 STAR BASE CHAIR / KRYSSFOT STOL CHAIR BASE ASSEMBLING / KRYSSFOT MONTERING OTTOMAN BASE ASSEMBLING / TABURETT MONTERING STEP 1 STEP 1 Put star leg (A) on to star center (B) by using hex key (D) and screws Put 4 star leg (E) on to 4 star center (F) and use hex key (D) and screw M8x30 Star leg / Bein x 5 M8x30 (C).