Advertisement
Quick Links
OPERATING INSTRUCTIONS
POWERVIBE
HIGH FREQUENCY VIBRATOR
™
FPV-45 & FPV-60
To reduce the risk of injury, all operators and maintenance personnel must read and understand
these instructions before operating, changing accessories, or performing maintenance on this power
equipment. All possible situations cannot be covered in these instructions. However care must be
exercised by everyone using, maintaining or working near this equipment.
1300 353 986
flextool.com.au
Parchem Construction Supplies Pty Ltd
7 Lucca Road, Wyong NSW AUS 2259
WARNING
010520
Advertisement
Related Manuals for Flextool POWERVIBE FPV-45
Summary of Contents for Flextool POWERVIBE FPV-45
- Page 1 All possible situations cannot be covered in these instructions. However care must be exercised by everyone using, maintaining or working near this equipment. 1300 353 986 flextool.com.au Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW AUS 2259...
- Page 2 General Safety Instructions for the Operation of Power Equipment HAZARDS AND RISKS The goal of Flextool is to produce power equipment that helps NEVER allow any person to operate equipment without the operator work safely and efficiently. The most important adequate instruction.
- Page 3 FLEXTOOL OPERATING INSTRUCTIONS POWERVIBE HIGH FREQUENCY VIBRATOR DO NOT operate the equipment where moisture or water is 1. Place the concrete vibrator head into the concrete so that the present. vibrating head is at ninety degrees to the surface, the vibrating head should not be inserted at an angle.
- Page 4 FLEXTOOL OPERATING INSTRUCTIONS POWERVIBE HIGH FREQUENCY VIBRATOR FLEXTOOL POWERVIBE HIGH FREQUENCY CONCRETE VIBE 45MM (FPV-45) ® ™ Vibrator Vibrator Power Shipping Operating Head Head Flexshaft Cable Dimensions Shipping Weight Diameter Length Length Amplitude Centrifugal Vibration Voltage Current Length (L x W x H)