Troubleshooting And Maintenance - XGLOW Focus Series Operating And Maintenance Manual

Troubleshooting & Maintenance
If the LED light fails to light:
Check the batteries for proper installation and t.
Check light for water, since the seal may have been
compromised due to improper battery cover installation. If water is found please
shake and blow out any excess water and leave the unit open to completely dry. If
the light is contaminated with salt water then ush the unit with fresh water and
dry as described above.
Regular maintenance of this light will extend its life and performance. Regularly check the
battery for leaks, as the corrosive materials will corrode the inside of this product. For longer
storage periods, the batteries should always be removed. Your LED product has a waterproof
seal that should always be kept free from dirt and harsh chemicals to maintain its watertight
properties. Check the gasket every time the batteries are replaced, and if there is dirt, wipe
gently with a soft, damp cloth, using mild soap, until it is clean.
8