Table of Contents
Advertisement
April 2019
This product is labelled with an individual number in the
format „YY/xxxx". „YY" is the year (e.g. 18 for 2018) and
„xxxx" is the continuous number that clearly identifies each
lifting point of a certain type (e. g. type PLAW 1.5 t M16).
5. Storage
This product must be stored in a clean and dry condition and
protected against corrosion (e.g. lightly oiled).
The lifting point must not be exposed to corrosive, thermal or
mechanical influences during storage or transport.
The thread should be protected by an appropriate protective
cap or net.
Method of lifting
Number of legs
Angle of inclination
Code
Thread
Torque
[mm]
[Nm]
PLZW 0,63 t
M10
10
Table 1
Straight pull 0°
Higher load capacities for loading
along the screw axis
(column „0°" in the load capacity table)
Table 2
Reduction factors
Operating temperature
Reduction factor
Shock loading
Reduction factor
Table 3
1
1
0°
90°
Load capacity
[kg]
1,100
630
C
Lateral load direction permitted
(ring is aligned) 90°
Nominal load capacity for loading vertically
to the screw axis
(column „90°" in the load capacity table)
less than -20 °C
-20 °C to 200 °C
Not permitted
1
Light shocks
Moderate shocks
1
0.7
Translation of original operating manual for lifting points PLZW pewag winner profilift zeta
6. Removal from service
The product has a high metal content and is fully recyclable.
At the end of its lifespan, the product must be recycled in
accordance with local regulations.
Prior to using this product for the first time, the operating
manual must have been read and understood in full.
2
2
2
2
0°
90°
0°–45°
45°–60°
2,200
1,260
890
D
200 °C to 300 °C
0.9
Strong shocks
Not permitted
3+4
3+4
0°–45°
45°–60°
630
1,330
940
Lateral load direction not permitted
(ring is not aligned)
Application not permitted due to unstable
conditions. The ring could turn suddenly while
under load - high risk for load and/or persons!
300 °C to 400 °C
0.75
2
3+4
asymm.
asymm.
630
630
more than 400 °C
Not permitted
7
Advertisement
Table of Contents
