Assemble Holders.
9
assemble
point
Be careful the assemble point.
11
Attach FPCB connector to bottom of the board. 4
point.
Be careful not to damage the FPCBs.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
10
Screw 8 point.
Be careful not to scratch the PBA.
Torque : 1.1 ~ 1.3 Kgf·cm
12
Attach FPCB connector to top of the board.
5 point.
Be careful not to damage the FPCB.
7-7
Level 2 Repair