Interior Led; Water Systems; Fresh Water Tank; Emptying The Water Tank - Helio O Series Owner's Manual

Turn off interior and exterior lighting when closing the trailer for
storage or towing. The heat from the incandescent bulb (shower
(O2) only) and interior LED may create a fire hazard.

Interior LED

Inside your Helio trailer, you will find two energy-efficient interior
LED's. These lights require little maintenance. Note that when
a change in the electrical power system occurs either from 120 V
to 12 V or from 12 V to 120 V, it is possible that one of your lights
does not turn on. A fuse resistor protects the LED light bulb.
To turn on the light, just press the 120 V – 12 V switch located at
the bottom of the seat to turn on the inactive light.

Water systems

There are two ways that fresh water can be supplied to your trailer.
You can use the water you are bringing with you in the trailer's
fresh water tank or water from a pressurized external source
(max 45 psi) using a regulator.
Access the pressurized external source by connecting the
recreational vehicle to the source using a clean water hose used
ONLY for bringing fresh water into the trailer.
The trailer's water system components are made using light and
durable materials resistant to corrosion for long-term use and
easy cleaning. By following the instructions on how to use the
water system as outlined in this manual, you can expect efficient
performance with minimal maintenance.
24
WARNING
WARNING
WARNING
WARNING

Fresh water tank

Your interior water supply tank is filled via a
gravity filling nozzle located on the side of the
trailer. To access it, untwist the cap. Water
can be added to the tank using a bucket or
collapsible hose. It is recommended you
use collapsible hoses of different colors
for the filling up and the emptying of the
fresh water tank. This way, you can know
at a glance which hose can be used safely.
If you are using a container such as a bucket to fill up the tank,
make sure it is clean and safe to use, and identify it so it is only
used for this purpose.
Note:
• Always fill up the tank with clean drinking water from a reliable
source.
• Make sure you close the cover of the gravity filling nozzle to keep
the system safe.
• You can use the water from the interior tank by turning on
the faucet.
• Once the system is filled, check for leaks.

Emptying the water tank

Water in the tank can be drained by opening the drain valve
located next to the water tank. Lift the handle of the drain valve
to empty the tank. Push the handle downwards to close the valve.
The drain valve for trailers equipped with tanks under the floor
is located under the trailer, next to the gravity filling nozzle.