Before Use; Indicator And Operating Elements - Berner BWDVC PERM L Operating Instructions Manual

Wet/dry vacuum cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
Read the operating manual carefully before starting to use the
vacuum cleaner. It provides important instructions for the operation,
safety, care and maintenance. Keep the operating manual in a safe
place and, in case you sell the unit, hand it on to the next owner.
The manufacturer reserves the right to carry out modifications to
the design and equipment.
Any other work not covered by this operating manual must not be
carried out.
3

Before use

When unpacking, check that the delivery is complete and that there
is no transport damage.
Before using, the operators should be provided with information,
instructions and training for the use of the vacuum cleaner and the
4

Indicator and operating elements

Select from the following functions and settings:
0
Vacuum cleaner is switched off
I
Vacuum cleaner is running
IR
Vacuum cleaner is running
AR
Ready for operation
Automatic shaker function
Fill level indicator *
Speed regulation
PERM L
Setting the suction hose
diameter PERM M-1, PERM H
Asbest
22 - en
substances that it is to be used for, including the safe procedure for
the removal of the gathered material.
- Plug socket current-conducting
- Plug socket current-conducting
- Automatic shaker function off
- Plug socket current-conducting
- Automatic shaker function on
- Plug socket curren-conducting
- Automatic shaker function on
- The vacuum cleaner is switched on and off via the connected electri-
cal/compressed air tool* at the plug socket.
- During suction, the folding filter cassettes are cleaned alternately
when a specific negative pressure is reached, at which there is still
adequate suction air.
- When the container is full and/or there is a blockage in the suction
hose, the full indicator lights up. On the M and H vacuum cleaners, an
acoustic signal is also emitted.
- The suction performance can be regulated using the speed regulator.
- Determine the maximum negative pressure for automatic shaking.
(*depending on the equipment variant of your vacuum cleaner)
*
depending on the equiment variant

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bwdvc perm m-1Bwdvc perm h asbest365900365899367932

Table of Contents