Advertisement
OPERATING INSTRUCTIONS
Using The Double Chopping Blade
(Cont.)
3. Place ingredients to be processed in
the bowl.
4. Then holding the processor lid by the
feeding tube, place the processor lid
onto the bowl and turn counter
clockwise to lock the lid in place.
Ensure that the lid tab has "clicked"
into place and that the arrow on the
lid is aligned with the dot on the unit.
Insert food pusher into feed chute.
(Fig. 6 & Fig. 7)
Fig. 7
Fig. 6
5. Plug the processor into a wall outlet.
6. Turn the speed control dial to the
desired speed setting.
PROCESSING EXAMPLES WITH THE DOUBLE CHOPPING BLADE
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
PRODUCT
QUANTITY
Meat*
24.5 oz / 700 gr.
Onions
24.5 oz / 700 gr.
Nuts
21 oz / 600 gr.
Fish*
24.5 oz / 700 gr.
Cheese
24.5 oz / 700 gr.
Liquids (soups)
24.5 oz / 700 gr.
Carrots
24.5 oz / 700 gr.
Bread
4 slices
Apples
24.5 oz / 700 gr.
Parsley
Max 4 bunches
Mayonnaise
Max 4 cups/1 liter
* Always allow food to cool before placing in the bowl.
* Remove all bones before processing.
7. Keep hands and utensils away from
the cutting blade while chopping
food to reduce the risk of severe
injury to persons or damage to the
food processor. A scraper may be
used, but ONLY when the food
processor is NOT running and has
been unplugged. Never feed food by
hand. Always use the food pusher.
(Fig. 8)
Fig. 8
8.
When finished processing the
ingredients, remove the processor lid
by turning clockwise.
9.
Remove the chopping blade first
before removing the processed food.
FOR SAFETY, ALWAYS USE THE
FOOD PUSHER WHEN PUTTING
FOOD INTO THE THE FEEDER TUBE.
NEVER FEED BY HAND.
10. Do NOT leave the appliance
unsupervised when it is in the "ON"
position.
RECOMMENDED
OPERATION TIMES
SPEED
High/Turbo
15 - 30 seconds
Low
15 - 30 seconds
High
15 - 30 seconds
Pulse
15 - 30 seconds
Pulse
15 - 30 seconds
Pulse
20 seconds
pulse
40-50 seconds
Low
40 - 50 seconds
High
10 - 30 seconds
High/Turbo
10 seconds
High
30 seconds
5
OPERATING INSTRUCTIONS
Dough Blade
CAUTION: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the "OFF"
position before inserting or removing
attachments.
1. Fit the processor bowl and spindle as
described previously on page 4.
2. Fit the dough blade over the spindle and
press firmly into place. (Fig. 9)
3. Place the ingredients into the bowl.
4. Fit the lid and click into place as
described in the "Setting Up" section
(page 4).
5. Plug in the food processor.
6. Turn the food processor on selecting
high speed. Maximum capacity for
processing dough is based on the
mixture of 21 oz. (600 g.) of flour and
14 oz. (400 g.) of water in order to
obtain 2.2 Lbs. (1 kg.) of dough.
7. Recommended speed for making dough
is high.
8. When it is time to knead the dough,
place speed control dial in the "Off"
position and pulse until the dough is
ready.
9. Remove the blade from the bowl before
removing the dough.
WHEN KNEADING DOUGH, DO NOT
OPERATE THE MACHINE LONGER THAN
20 SECONDS. AFTERWARDS WAIT AT
LEAST 2 MINUTES BEFORE OPERATING
THE MACHINE AGAIN.
FOR SAFETY,
ALWAYS LEAVE
THE PUSHER IN
PLACE WHILE
OPERATING THE
PROCESSOR.
Fig. 9
Whipping Attachment
CAUTION: Make sure that the
unit is unplugged from the
power source and the speed control
dial is in the "OFF" position before
inserting or removing attachments.
Whipping Attachment (cont.)
1.
Fit the processor bowl and spindle
as described previously on page 4.
2.
Fit the whipping attachment over the
spindle and press firmly into place.
(Fig. 10)
3.
Place the ingredients
into the bowl.
4.
Fit the lid and
click into place as
Fig. 10
described in the
"Setting Up" section (page 4).
5.
Plug in the food processor.
6.
Turn the food processor on
selecting high speed.
7.
Recommended speed for whipping
is high.
8.
Remove the whipping attachment
from the bowl before removing the
whipped ingredients.
FOR SAFETY, ALWAYS LEAVE THE
PUSHER IN PLACE WHILE
OPERATING THE PROCESSOR.
Citrus Juice Filter
CAUTION: Make sure that the unit is
unplugged from the power source
and the speed control dial is in the
"OFF" position before inserting or
removing attachments.
WARNING: Always Operate The
Juicer At Lowest Speed Only. Do
Not Operate The Citrus Juicer At
Higher Speeds.
1. Fit the processor bowl
as detailed previously
(page 4).
2. Fit the citrus juice filter
into the processor
bowl. (Fig. 11)
Fig. 11
3.
Rotate counter
clockwise. Ensure
that the citrus juice
filter tab has clicked
into place. (Fig. 12)
Fig. 12
6
Advertisement
