Do you have a question about the Purify O3 Elite Series and is the answer not in the manual?
Questions and answers
Marianne Sampson
May 30, 2025
I just bought an Elite ozone cleaner for my CPap. Do I take the neoprene head gear off the face mask before cleaning? Do I disconnect everything, the hose from the face mask etc before cleaning. Does the machine need to be attached to the hose and then add everything to the bag, zip and clean.
Nothing says how often to clean my equipment. So please tell me.
It says to wipe residue after cleaning from mask and hose. Do I need something cleaning wand to run thru the hose in case there is any ozone residue left? I am an intelligent person but found your user Manuel lacking. Please answer questions as soon as you can
1 comments:
Mr. Anderson
May 30, 2025
The neoprene headgear and hose should be wiped clean using a cleansing wipe or damp cloth. For optimal sanitation, disconnect/remove the accessories from the device and place them with the Purify O3 Elite inside the sanitizing case or a plastic storage tote (12 qts or less) with a tight-fitting lid. After the disinfection cycle, leave the case closed for at least 90 minutes to allow residual ozone to dissipate. The mask can be sanitized daily, as desired.
This answer is automatically generated
Related Manuals for Responsive Respiratory Purify O3 Elite Series
Summary of Contents for Responsive Respiratory Purify O3 Elite Series
Page 1
Mask, Tubing, Tees & Parts Sanitation & Deodorizing CPAP/BiPAP Humidification Chamber Sanitation Frequently Asked Questions Para instrucciones en español - refiérase a las páginas 11-21 Responsive Respiratory, Inc. 6244 Lemay Ferry Rd. • St. Louis, MO 63129 866-333-4030 • 866-333-4035 F www.purifyo3.com • www.respondo2.com...
Page 2
CALIFORNIA PROPOSITION 65 WARNING WARNING: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ADVERTENCIA: Este producto puede exponerlo a sustancias químicas que el Estado de Califonia reconoce como causantes de cáncer y defectos de nacimiento u ostros daños reproductivos.
Page 3
Thank you for purchasing Responsive Respiratory’s Purify O3 Elite Series Ozone Sanitizer and Deodorizer. The Purify O3 Elite utilizes ozone technology to sanitize and eliminate odors quickly and effectively without water, soap or added chemicals. With proper use, the Purify O3 Elite Sanitizer is proven to effectively kill 99.99% of germs and bacteria.
Page 4
PARTS INCLUDED: • Purify O3 Elite sanitizer with rechargeable battery • USB cable and charging adapter • Tubing adapter • Dual purpose sanitizing/travel case • User Manual Purify O3 Elite Sanitizer Dual Purpose Sanitizing/Travel Case #190-6002 USB Cable Charging Adapter Tubing Adapter #190-6103 #190-6004...
Page 5
PAP and nebulizer machines. LIMITED WARRANTY: The Purify O3 Elite Series sanitizer is covered by a limited warranty for a period of two (2) years from date of purchase and covers defects in the product resulting from faults in the material or workmanship. Damage due to improper use, misuse or normal wear is not covered.
CHARGING THE BATTERY: The Purify O3 Elite sanitizer contains a rechargeable Lithium-ion battery. For best performance and battery life, run the sanitizer 4-5 disinfection cycles or until the battery is fully drained before recharging. Please ensure the sanitizer is powered off while charging. To charge the battery, connect the USB cable to the charging adapter.
Page 7
SANITIZING & DEODERIZING MASKS, TUBING & PARTS: Disconnect masks, tubing, Tees and accessories from machine. Using a cleansing wipe or damp, clean cloth, lightly surface clean mask, nasal pillow or other surfaces of visible residue. Place Purify O3 Elite sanitizer and accessories to be sanitized/deodorized inside the supplied sanitizing/travel case.
Page 8
To activate the Purify O3 Elite, place and hold finger on the On/Off Touch Sensor for 2 seconds as shown in Figure 4. The Purify O3 Elite will beep once and the Disinfection Progress Ring shown in Figure 5 will illuminate to indicate the disinfection process has begun.
Page 9
NOTE: To stop the sanitation process mid-cycle, place finger on the On/Off Touch Sensor for 4 seconds. The sanitizer will signal the cancellation with a long beep and power off. Reseal case/container and let sanitizer and accessories sit in closed case/container for at least 90 minutes to allow residual ozone to dissipate before use.
Page 10
SANITIZING CPAP/BIPAP HUMIDIFICATION CHAMBER & TUBING : Ensure CPAP/BiPAP machine is turned off. Empty water from humidification chamber. Place humidification chamber and/or tubing inside the supplied sanitizing/travel case. If the tubing and humidification chamber are too large for the sanitizing case, a medium-sized storage container with tightly fitting lid (12 qts or less) may be used, refer to Figure 7 below.
Page 11
WARNING: Operate only in a well ventilated area. Do not breathe or ingest the ozone. Zip case fully closed (or secure lid, if utilizing container). The sanitizing cycle for Purify O3 Elite is approximately 35 minutes in length. During the cycle, the Progress Indicator Ring will darken to indicate when the cycle is one fourth, halfway, and three-fourths complete as shown in Figure 10.
FREQUENTLY ASKED QUESTIONS: The disinfection process leaves an odor: - Before using, run your CPAP/BiPAP or nebulizer machine for 20-60 seconds to allow any residual odor to flush from the device. - Run the Purify O3 Elite disinfection cycle earlier in the day to allow time for the residual odor to dissipate before use.
Page 13
DESINFECTANTE PARA EQUIPOS CPAP/BiPAP MANUAL DE USO Gracias por comprar la serie Purify O3 Elite de Responsive Respiratory Desinfectante de ozono CPAP/BiPAP. Purify O3 Elite utiliza tecnología de ozono para desinfectar equipos CPAP/BiPAP de forma rápida y efectiva sin agua, jabón ni productos químicos añadidos.
Page 14
PARTES INCLUIDAS: • Purify O3 Elite unidad desinfectante con batería recargable • Cable USB y adaptador de carga • Adaptador de tubo • Estuche de doble uso disenfector/viaje • Manual de uso Purify O3 Elite Unidad Desinfectante Estuche de doble uso disenfector/viaje #190-6002 Adaptador de tubo Cable USB...
Page 15
ANTES DE USAR: Antes de usar, por favor asegúrese que: • El equipo CPAP/BiPAP esté apagado • Toda el agua haya sido vaciada de la cámara humificadora • Cualquier residuo visible en la máscara/almohadilla nasal sea limpiado usando una toallita de limpieza o un paño húmedo •...
Page 16
CARGANDO LA BATERÍA: La unidad desinfectadora Purify O3 Elite contiene una batería de ión-litio recargable. Antes de recargar la batería, para un mejor rendimiento y vida útil de la batería, use el desinfectante 4-5 ciclos de desinfección, o hasta que la batería esté...
Page 17
DESINFECCIÓN MÁSCARA/TUBERÍA CPAP/BiPAP: Desconecte la máscara y la tuberia del máquina CPAP/BiPAP. Usando una toallita de limpieza o un paño húmedo, limpie ligeramente la máscara/ almohadilla nasal de cualquier residuo. Coloque la máscara, el tubo y el desinfectante Purify O3 Elite dentro del estuche de desinfección / viaje suministrado.
Page 18
Para activar el Purify O3 Elite, coloque y mantenga el dedo en el sensor táctil de encendido/apagado durante 2 segundos como se muestra en la Figura 4. El Purify O3 Elite emitirá un pitido una vez y el anillo de progreso de desinfección que se muestra en la Figura 5 se iluminará...
Page 19
NOTA: Para detener el proceso de saneamiento a mitad del ciclo, coloque el dedo en el sensor táctil de encendido/apagado durante 4 segundos. El desinfectante indicará la cancelación con un pitido largo y apagado. Vuelva a sellar la caja/recipiente y deje que el desinfectante y los accesorios se asienten en la caja/recipiente cerrado durante al menos 90 minutos para permitir que el ozono residual se disipe antes de usar.
Page 20
DESINFECCIÓN DE CÁMARA DE HUMIDIFICACIÓN Y TUBERÍA CPAP/BIPAP: Asegúrese que la máquina CPAP/BiPAP esté apagada y desconectada. Vacíe el agua de la cámara de humidificación. Coloque la cámara y/o tubo de humidificación dentro del estuche de desinfección/viaje suministrado. Si el tubo y la cámara de humidificación son demasiado grandes para la caja de desinfección, se puede usar un recipiente de almacenamiento de tamaño mediano con tapa sólida (12 cuartos o menos), consulte la Figura 7 a continuación.
Page 21
ADVERTENCIA: Operar solo en un área bien ventilada. No respire ni ingiera el ozono. Cierre con cremallera completamente cerrada (o tapa segura, si utiliza un contenedor). El ciclo de desinfección para Purify O3 Elite es de aproximadamente 35 minutos de duración. Durante el ciclo, el anillo indicador de progreso se oscurecerá...
Page 22
PREGUNTAS FRECUENTES: El proceso de desinfección deja un olor: - Antes de usarlo, ejecute su máquina CPAP/BiPAP durante 20-60 segundos para permitir que el olor residual salga del dispositivo. - Ejecute el ciclo de desinfección Purify O3 Elite más temprano en el día para dejar tiempo para que el olor residual a disiparse antes de su uso.
Page 23
Desinfección de todos los componentes CPAP/BiPAP en un ciclo: - Se puede usar un recipiente de almacenamiento de tamaño mediano con tapa (menos de 12 cuartos de galón) para desinfecte su máscara, tubería y cámara de humidificación de agua en un ciclo para ahorrar tiempo. - Siga las instrucciones de desinfección que se enumeran en la sección de instrucciones de este folleto.
Need help?
Do you have a question about the Purify O3 Elite Series and is the answer not in the manual?
Questions and answers
I just bought an Elite ozone cleaner for my CPap. Do I take the neoprene head gear off the face mask before cleaning? Do I disconnect everything, the hose from the face mask etc before cleaning. Does the machine need to be attached to the hose and then add everything to the bag, zip and clean. Nothing says how often to clean my equipment. So please tell me. It says to wipe residue after cleaning from mask and hose. Do I need something cleaning wand to run thru the hose in case there is any ozone residue left? I am an intelligent person but found your user Manuel lacking. Please answer questions as soon as you can
The neoprene headgear and hose should be wiped clean using a cleansing wipe or damp cloth. For optimal sanitation, disconnect/remove the accessories from the device and place them with the Purify O3 Elite inside the sanitizing case or a plastic storage tote (12 qts or less) with a tight-fitting lid. After the disinfection cycle, leave the case closed for at least 90 minutes to allow residual ozone to dissipate. The mask can be sanitized daily, as desired.
This answer is automatically generated