New Generation Electronics Applied to Beam Position Monitors, Klaus B. Unser 1996 Beam Instrumentation Workshop, Argonne National Laboratory. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
In exercising this warranty, Bergoz Instrumentation will repair, or at its option, replace any product returned to Bergoz Instrumentation or its local distributor within the warranty period, provided that the warrantor's examination discloses that the product is defective due to workmanship or materials and that the defect has not been caused by misuse, neglect, accident or abnormal conditions or operations.
AC mains Place all DIP switches to the left: OFF BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich TVA-VAT-IVA-USt. Nº FR88414997130 - Sàrl. capital 152K - Siren 414 997 130 R.C.S. Bourg - APE 332B...
Page 6
300 mV of demodulated signal amplitude difference BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich TVA-VAT-IVA-USt. Nº FR88414997130 - Sàrl. capital 152K - Siren 414 997 130 R.C.S. Bourg - APE 332B...
Page 7
Observe the noise spectrum with an FFT or baseband spectrum analyser, at various signal levels. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
“Connector Pins Allocation”, this manual). SYNC frequency is 1/4 of sampling frequency. The internal clock can be overridden by an external clock. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Position error (linearity) vs. input signal strength LabVIEW data acquisition virtual instrument using NB-MIO-16XH sampler, by Karen Scott BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
But don’t pull down too early, or SBS will measure peak ambiant noise ! BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Page 17
DIN41612 rear connector (pin c19). On the BPM chassis ref. BPM-RFC/xx, it is available from the DB15 connector (pin 2). BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
20%. These variations are purely statistical and can be eliminated by averaging a series of readings. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Page 19
BPM module. It provides the RF signals BUTA, BUTB, BUTC, BUTD and the delayed GATE signal. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
The gain potentiometers are accessible via holes bored through the Single Button Sampling (option) piggy-back board. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Page 21
X gain: R168 || R141 Y gain: R169 || R151 BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich TVA-VAT-IVA-USt. Nº FR88414997130 - Sàrl. capital 152K - Siren 414 997 130 R.C.S. Bourg - APE 332B...
New Generation Electronics Applied to Beam Position Monitors, K.B. Unser, page 4, Tbp.: proceedings of the 1996 Beam Instrumentation Workshop, Argonne. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Page 23
On request, the BPM manufacturer will send the solder bridges layout for a given LO frequency. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Reset pulse must terminate at least 1 ms before the bunch to be measured. Default value: high BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Page 25
Output impedance: 1kΩ Driving capability: 1 mA BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich TVA-VAT-IVA-USt. Nº FR88414997130 - Sàrl. capital 152K - Siren 414 997 130 R.C.S. Bourg - APE 332B...
Page 26
Voltage range: >0...<+10V. Active only when optional signal AGCD* (AGC disable) is pulled down. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Sampling”, page 7, this manual). For a wider range, the on-board clock can be overridden by an external clock signal (see “External Clock”, page 8, this manual). BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Page 29
Jim Hinkson, private communication, June 1995 BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich TVA-VAT-IVA-USt. Nº FR88414997130 - Sàrl. capital 152K - Siren 414 997 130 R.C.S. Bourg - APE 332B...
The adjustments above cannot be made when the BPM processing unit is in the chassis. They require a BPM-KIT or a card extender BPM-XTD. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
Very useful, because the RF cables at the rear of the chassis are too crowded to be disconnected. BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
DB15 female BPM station output connector, one per BPM station IEC male connector for AC mains BERGOZ Instrumentation - 01630 Saint Genis Pouilly, France - Tel.: +33-450.426.642 - Fax: +33-450.426.643 email: bergoz@bergoz.com - http://www.bergoz.com - Registre des Métiers: Bourg-en-Bresse - Registre des ingénieurs: Zurich...
BPM MODULE REAR CONNECTOR DIN41612M 24+8 Note: For connections, See Connector Pins Allocation, this manual. BPM chassis for 1 up to 16 BPM modules are part of Bergoz Instrumentation sales program (BPM- RFC/X) and include the necessary mating connectors (See BPM chassis, this manual).
Please send me one copy of the corresponding schematics and board layout. I will use it for the instrument’s maintenance only. I will make copies only for my own use. I will inform others who need these schematics that they should request them from Bergoz Instrumentation. Signed: xxxxxxx ACKNOWLEDGEMENT Many of the important –even fundamental–...
Page 37
Annex I RF Connectors from Siemens Excerpt from Siemens Plug connectors data book 1992 Other references: Siemens RF connector data book, part number A23001-G22-D004-X-7400 Siemens Connector DIN41612 data book, part number A23001-G21-D012-X-7400.
Page 38
RF Connectors from Siemens (Cont’d) Excerpt from Siemens Plug connectors data book 1992 Other references: Siemens RF connector data book, part number A23001-G22-D004-X-7400 Siemens Connector DIN41612 data book, part number A23001-G21-D012-X-7400.
Page 42
New Generation Electronics Applied to Beam Position Monitors Klaus B. Unser BERGOZ Precision Beam Instrumentation F-01170 Crozet, FRANCE Abstract: Cellular telephones and GPS (Global Positioning System) satellite receivers are examples of modern rf engineering. Taking some inspiration from those designs, a precision signal processor module for beam position monitors was developed.
Page 44
application was transverse feedback and beam interlock systems near insertion devices in the ALS (Advanced Synchrotron Light Source at the Lawrence Berkeley National Laboratory). Our BPM signal processor uses the same basic concept and architecture, but its centre frequency is programmable anywhere between 100 MHz and 1 GHz. It tracks input signals over a limited frequency range (±200 kHz, extension possible up to ±1 MHz).
Page 45
analog circuits. They use the following algorithms for a typical position pick-up (with the 4 electrodes rotated at 45˚ in respect of the vertical axis) The calibration constants Kx and Ky of the beam position pick-up are an approximation and apply only to the centre of the vacuum chamber. The basic operating principle, as described above, has been used for the first time at the NSLS storage ring (3).
Page 46
The requirements above are very different from the usual specifications of telecommunication equipment. It was therefore necessary to build a special amplifier with discrete transistors to cover the 100 MHz to 1 GHz frequency range and reach an acceptable compromise between conflicting demands. Local oscillator and frequency converter An active mixer is used as down converter to the 21.4 MHz intermediate frequency (if).
Page 47
Synchronous detection of the if signal requires a reference frequency. This reference is generated by a voltage controlled oscillator (VCO). A phase detector compares the reference with a filtered sample of the carrier frequency and controls the VCO in a phase locked loop (PLL).
Page 48
• All other input and output connections have low pass filters to keep the interference outside and limit the frequency response to what is absolutely necessary. • All control inputs have 10-ms LP-filter time constants. • Each circuit function on the board is specifically designed to be insensitive to frequencies outside its normal operating range.
Page 49
generator (Marconi Instruments 2022D) as a signal source. A precision 4-way power splitter and 4 specially designed precision attenuators with remote switching control prepare the 4 input signals. A Macintosh computer with a 16-bit ADC, multiplexer and control interface (National instruments NB-MIO-16X) runs a specially developed LabVIEW application program (6).
Need help?
Do you have a question about the MX-BPM and is the answer not in the manual?
Questions and answers