Events - Monoprice NVR User Manual

EVENTS

→
Click Advanced
The following editable options are available on this screen:
Event Type: Use this pull-down list box to select the type of event for which you
want to edit the parameters. You can select the Disk Full, Disk Error, or Video
Loss event types.
Enable: Use this check box to determine whether or not this event type is enabled.
Show Message: Use this check box to determine whether or not on-screen
messages are displayed in the Live display and in recorded videos.
Send Email: Use this check box to determine whether or not an email is sent
whenever this type of event occurs.
Buzzer: Use this pull-down list box to set the length of time that the alarm buzzer will
sound whenever an event occurs. You can set the buzzer to sound for 10, 20,
40, or 60 seconds.
Events to display the following screen.
68