Check The Installation - UPC DigiCard Manual

Manual DigiCard
Insert the DigiCard
4
Insert the DigiCard in the slot at the rear of your TV set.
Push the DigiCard into the slot until you feel it click into place.
!
The authentication process (registration with UPC) is launched automatically.
!
Wait until the authentication process is complete. This process may take several minutes.

Check the installation

5
Check the installation by selecting one of the newly subscribed additional
channels. If the channel is broadcast, the installation was successful.
If you cannot receive any of the newly subscribed additional channels,
!
remove the DigiCard from the TV set and repeat steps 1 to 4.
Ensure that the necessary data is entered correctly.
If you have any questions or doubts, please consult our website upc.ch/support
24
Rear of TV
or
Rear of TV