Operating The Food Processor - Bravetti FOOD PROCESSING CENTER BP101H Owner's Manual

OPERATING INSTRUCTIONS
Speed Control Dial
The food processor and blender
speed control dial has speeds settings
as follows:. (Fig. 1)
Off/1-9 + Max
Pulse/Turbo
The speed can be
adjusted while the
food processor is
in use. Fig. 1
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse"
when the unit is in the "Off" position.
Use "Turbo" when the unit is in the
"On" position and you need a burst of
power. Please note that the "Pulse"
and "Turbo" is only intended to be
used for short "bursts" of processing.

Operating the Food Processor

Setting up:
1. CAUTION: Make sure that the unit is
unplugged from the power source and
the the Speed control dial is in the
"Off" position before inserting or
removing any attachments and before
cleaning.
2. Place the food processor bowl onto
the processor body. There is no need
to turn the bowl. (Fig. 2)
3. When fitted correctly, the handle will
fit into the slot at the base of the unit.
Fig. 2
4. Now you are ready to use any of the
attachments that come with the unit;
i.e. the double chopping blade, dough
blade, etc.
Using The Double Chopping Blade
Always disconnect unit from power
source before cleaning or changing
accessories.
WARNING: USE EXTREME CAUTION
WHEN HANDLING THE BLADES.
THEY ARE EXTREMELY SHARP
Always remove the chopping blade
protective cover(s) before using.
The double chopping
blade may be
used with one
blade or with
Fig. 3
two blades.
1. To use as
a double
blade, carefully Double
slip the separate
Blade
Main Blade
blade over the
shaft of the
main blade.
(Fig. 3 & Fig. 4)
Fig. 4
Two Blades
Together
2. Then insert onto the shaft of the
processor bowl. Always hold the
chopping blade by the upper plastic
part. (Fig. 5)
Fig. 5
4
OPERATING INSTRUCTIONS
Using the Whisk Head & Whisk
Beater
CAUTION: Make sure that the unit is
unplugged from the power source and
the operating button is "OFF" before
inserting or removing attachments.
1. Make sure that the blade storage
cover is closed during use.
2. Fit the processor bowl and spindle as
described previously on page 4.
3. Click the whisk beater into the short
extension of the whisk head. (Fig. 15)
4. Place the long extension of the
whisking head onto the motor shaft.
(Fig. 16)
5. Add ingredients to the bowl.
6. Fit the lid and click into place as
detailed in the "Setting Up" section
(page 4). (Fig. 17)
7. Plug the processor into the wall outlet.
8. Turn the processor on selecting
maximum speed.
For your safety, the pusher must stay
in its place while operating the
appliance. Keep hands, hair, clothing
as well as spatulas and other utensils
away from beaters during operation to
reduce the risk of injury and/or
damage to the appliance.
IMPORTANT WARNING: NEVER USE
THE WHISK ATTACHMENT FOR
DOUGH KNEADING.
DO NOT IMMERSE THE WHISK HEAD IN
ANY LIQUID.
To clean the whisk beater, remove it
from the whisk head and wash.
Wipe the whisk head clean with a
damp cloth.
Fig. 15
Fig. 16
Fig. 17
Whipper Attachment
CAUTION: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the "OFF"
position before inserting or removing
attachments.
1. Fit the processor bowl on the unit.
2. Insert the whipper and press firmly into
place. (Fig. 18)
3. Place the ingredients into the bowl.
4. Fit the lid and click into place as
described in the "Setting Up" section
(page 4).
5. Insert the food pusher and then plug in
the food processor.
6. Turn the food processor on selecting
high speed.
7. Recommended speed for whipping
is high.
8. Remove the whipper from the bowl
before removing the whipped
ingredients.
FOR SAFETY, ALWAYS LEAVE THE
PUSHER IN PLACE WHILE OPERATING
THE PROCESSOR.
Fig. 18
9