1. Manuals
  2. Brands
  3. IOtech Manuals
  4. Controller
  5. DaqBoard /1000 Series
  6. User manual

IOtech DaqBoard 1000 Series User Manual

Hide thumbs Also See for DaqBoard 1000 Series:
Table of Contents

Advertisement

Quick Links

sales@artisantg.com
artisantg.com
(217) 352-9330 |
|
Click HERE
Find the Measurement Computing / IOtech DaqBoard/2000 at our website:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DaqBoard 1000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IOtech DaqBoard 1000 Series

Summary of Contents for IOtech DaqBoard 1000 Series

  • Page 1 (217) 352-9330 | Click HERE Find the Measurement Computing / IOtech DaqBoard/2000 at our website:...
  • Page 2 User’s Manual For PCI-bus & Compact PCI-bus Data Acquisition Boards 1033-0901 Rev. © 1999 through 2005 by IOtech, Inc. Printed in the United States of America 879194 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 4 IOtech, Inc. cannot be held liable for any damages resulting from the use or misuse of this product. Copyright, Trademark, and Licensing Notice All IOtech documentation, software, and hardware are copyright with all rights reserved. No part of this product may be copied, reproduced or transmitted by any mechanical, photographic, electronic, or other method without IOtech’s prior written consent.
  • Page 5 Start [Desktop “Start” pull-down menu] Programs IOtech DaqX Software You can also access the PDF documents directly from the data acquisition CD by using the <View PDFs> button located on the opening screen. Refer to the PDF documentation for details regarding both hardware and software.
  • Page 6 DBK Options.pdf The DBK Option Cards and Modules Manual discusses each of the DBK products available at the time of print. The DBK Options document does not apply to DaqBoard/1000 Series boards. 457-0905 Programmers Manual.pdf The programmer’s manual pertains to developing custom programs using Applications Program Interface (API) commands.
  • Page 7 DaqBoard/1000 and /2000 Series User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 8 Manual Layout DaqBoard/1000 and /2000 Series, Installation Guide (p/n 1033-0940) DaqBoard/2000c Series, Installation Guide (p/n 1061-0940) Chapter 1 – Daq Systems and Device Overviews. This chapter begins with a discussion of the “modular concept” that is associated with Daq data acquisition systems. The chapter then goes on to provide an overview for each DaqBoard/1000 and /2000 Series board.
  • Page 9 This page is intentionally blank. viii DaqBoard/1000 and /2000 Series User’s Manual 969594 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 10: Table Of Contents

    Table of Contents DaqBoard/1000 and /2000 Series, Installation Guide (p/n 1033-0940) DaqBoard/2000c Series, Installation Guide (p/n 1061-0940) 1 – Daq Systems and Device Overviews Daq Systems, the Modular Concept ……1-1 Theory of Operation, DaqBoard/1000 and/2000 Series Boards…… 1-3 DaqBoard/1000 ….. 1-7 DaqBoard/1005 …..
  • Page 11 This page is intentionally blank. DaqBoard/1000 and /2000 Series User’s Manual 969594 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 12 Use care to avoid touching board surfaces and onboard components. Only handle boards by their edges (or ORBs, if applicable). Ensure boards do not come into contact with foreign elements such as oils, water, and industrial particulate. 1033-0940, © 1999 through 2004 by IOtech, Inc. rev. IG-1 898195...
  • Page 13 Modules User’s Manual (p/n 457-0905). After the install you can navigate to the DBK manual and other relevant electronic documents from your desktop as follows: Start Programs IOtech DaqX Software DaqBoard 2000 Series Users Note: DaqBoard/1000 Series boards do not support DBK options.
  • Page 14 – Install Boards in available PCI Bus-slots Step 2 IMPORTANT: Software must be installed before installing hardware. Turn off power to, and UNPLUG the host PC and externally connected equipment prior to removing the PC’s cover and installing the DaqBoard. Electric shock or damage to equipment can result even under low-voltage conditions.
  • Page 15 7. Refer to the figure at the right. Align the groove in the DaqBoard’s PCI edge-connector with the ridge of the desired PCI slot, and with the PC’s corresponding rear- panel slot. 8. Push the board firmly into the PCI slot. The board will snap into position.
  • Page 16 – Configure Boards Step 3 DaqBoard/1000 and /2000 Series Boards have no jumpers or switches to set. Configuration is performed, in its entirety, through software. Refer to the following figure and steps to complete the configuration. The numbers in the figure correspond to the numbered steps immediately following the figure. Accessing the DaqBoard/2000 Properties Tab Note: Images are similar for DaqBoard/1000 Series.
  • Page 17 Using “Add Device” This method is for users who have accessed the Daq Configuration control panel applet, but have no DaqBoard1K icon or DaqBoard2K icon [as described on page IG-5, step 2]. (A) After accessing the Daq Configuration control panel applet, click on the <Add Device>...
  • Page 18 PDF documents. Note that hardcopy versions of manuals can be ordered from the factory. Note: In regard to functionality, the DaqBoard/2000c Series boards are identical to their DaqBoard/2000 Series counterparts. 1061-0940, © 2001 through 2004 by IOtech, Inc. rev. IG-1 979294...
  • Page 19 User’s Manual (p/n 457-0905). After the install you can navigate to the DBK manual and other relevant electronic documents from your desktop as follows: Start Programs IOtech DaqX Software DaqBoard 2000 Series Users Minimum System Requirements ® PC system with Pentium...
  • Page 20 CAU T I ON Turn power OFF, and UNPLUG the host PC and externally connected equipment prior to removing any cover plates or modules. Electric shock or damage to equipment can result even under low-voltage conditions. Take ESD precautions (packaging, proper handling, grounded wrist strap, etc.) Use care to avoid touching board surfaces and onboard components.
  • Page 21 12. Plug in all cords and cables that were removed in step 3. 13. Apply power to, and start up the PC. Note: At this point some PCs may prompt you to insert an installation disk. While this is rare, if you do receive such a prompt simply place the install CD into the disk drive and follow the screen prompts.
  • Page 22 1. Run the Daq Configuration control panel applet. Navigation from the desktop to the applet is as follows: Start Settings Control Panel Daq*Configuration (double-click) 2. Double-click on the Device Inventory’s DaqBoard2K0 icon. The DaqBoard/2000 Properties tab (used for the entire DaqBoard/2000 Series) will appear.
  • Page 23 IG-6 DaqBoard/2000c Series Installation Guide 1061-0940, rev 4.0 979294 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 24: Daq Systems And Device Overviews

    Daq Systems and Device Overviews Daq Systems, the Modular Concept …… 1-1 Theory of Operation, DaqBoard/1000 and /2000 Series Boards …… 1-3 DaqBoard/1000 …… 1-7 DaqBoard/1005 …… 1-9 DaqBoard/2000 ….… 1-11 DaqBoard/2001……. 1-13 DaqBoard/2002…… 1-15 DaqBoard/2003…… 1-17 DaqBoard/2004…… 1-19 DaqBoard/2005…… 1-21 Using DBK Cards and Modules for Signal Conditioning …..
  • Page 25 In addition to the included out-of-the-box software, Daq products can be controlled via user-written custom programs through Applications Program Interface (API). Several languages are supported, including C/C++ and VisualBASIC. DaqView and DASYLab can only be used with one DaqBoard at a time. LabView can be used with multiple boards.
  • Page 26 Theory of Operation for DaqBoard/1000 and /2000 Series Boards As implied by the following matrix, the operational material does not apply globally to every board. For example, DaqBoard/1005, /2002, and /2005 have no analog output channels. For ease of understanding, each board is discussed independently, following the matrix. Note that pinouts are provided in chapter 2 for the DaqBoard/1000 Series and in chapter 3 for the DaqBoard/2000 Series.
  • Page 27 Synchronous Input Operations for DaqBoard/1000 and DaqBoard/2000 Series Boards As indicated in the I/O matrix, applicable DaqBoards allow for synchronous scanning and acquisition of Analog Input, Digital Input and Counter Input Data at up to 200kHz aggregate scanning rates. For applicable DaqBoard/2000 Series devices, the Analog Input data can be either directly to the board or from expansion analog input modules connected to P1.
  • Page 28 Synchronous Output Operations The DaqBoard/1000 allows synchronous output of any D/A channels available at up to 100kHz for each channel. All D/A channels available may have output streamed to them and clocked out synchronously. The D/A channels may be configured for waveform output. The DaqBoard/2000 Series boards allow synchronous output of any D/A or P3 16-bit Digital channels available at up to 100kHz for each channel.
  • Page 29 Expansion Digital I/O (DaqBoard/2000 Series only) The DaqBoard/2000 Series boards that have digital I/O capabilities have the ability to expand these through the P2 port and the connection of applicable digital I/O expansion modules. These modules are discussed in the DBK Option Cards & Modules User’s Manual. When using the digital I/O expansion modules the local P2 Intel 8255 digital I/O becomes inaccessible in lieu of the expansion modules.

  • Page 30: Daqboard/1000

    DaqBoard/1000 1 6 An a log 2 An a log 2 4 D igit a l 4 Cou n t e r 2 Tim e r I n pu t Ou t pu t I / O I n pu t s Ou t pu t s DaqBoard/1000 is a high-speed, multi-function, plug-and-play data acquisition board for PCI bus computers.
  • Page 31 DaqBoard/1000 Block Diagram Connections Installation Reference Note: For the DaqBoard/1000 installation procedure, refer to the DaqBoard/1000 and /2000 Series Installation Guide. A copy of the guide is included at the beginning of this manual. I/O Connectors All input and output signals are available at the board’s 68-pin SCSI III connector. Chapter 2 includes a pinout.

  • Page 32: Daqboard/1005

    DaqBoard/1005 1 6 An a log 2 4 D igit a l 4 Cou n t e r 2 Tim e r I n pu t s I / O I n pu t s Ou t pu t s DaqBoard/1005 is a high-speed, multi-function, plug-and-play data acquisition board for PCI bus computers.
  • Page 33 DaqBoard/1005 Block Diagram Connections Installation Reference Note: For the DaqBoard/1005 installation procedure, refer to the DaqBoard/1000 and /2000 Series Installation Guide. A copy of the guide is included at the beginning of this manual. I/O Connectors All input and output signals are available at the board’s 68-pin SCSI III connector. Chapter 2 includes a pinout.

  • Page 34: Daqboard/2000

    DaqBoard/2000 1 6 An a log 2 An a log 4 0 D igit a l 4 Cou n t e r 2 Tim e r I n pu t Ou t pu t I / O I n pu t s Ou t pu t s DaqBoard/2000 and DaqBoard/2000c are high-speed, multi-function, plug-and-play data acquisition boards for PCI and compact-PCI bus computers, respectively.
  • Page 35 DaqBoard/2000 Block Diagram* * The DaqBoard/2000c Block Diagram is the same, with exception that the /2000c board uses a compact-PCI Bus instead of a standard PCI bus. Connections Installation Reference Note: For the DaqBoard/2000 and DaqBoard/2000c installation procedure, refer to either the DaqBoard/1000 and /2000 Series Installation Guide or to the DaqBoard/2000c Series Installation Guide, as applicable.

  • Page 36: Daqboard/2001

    DaqBoard/2001 1 6 An a log 4 An a log 4 0 D igit a l 4 Cou n t e r 2 Tim e r I n pu t Ou t pu t I / O I n pu t s Ou t pu t s DaqBoard/2001 and DaqBoard/2001c are high-speed, multi-function, plug-and-play data acquisition boards for PCI or compact-PCI bus computers, respectively.
  • Page 37 DaqBoard/2001 Block Diagram* * The DaqBoard/2001c Block Diagram is the same, with exception that the /2001c board uses a compact-PCI Bus instead of a standard PCI bus. Connections Installation Reference Note: For the DaqBoard/2001 and /2001c installation procedure, refer to either the DaqBoard/1000 and /2000 Series Installation Guide or to the DaqBoard/2000c Series Installation Guide, as applicable.

  • Page 38: Daqboard/2002

    DaqBoard/2002 4 0 D igit a l 4 Cou n t e r 2 Tim e r I / O I n pu t s Ou t pu t s DaqBoard/2002 and /2002c are high-speed, multi-function, plug-and-play data acquisition boards for PCI and compact-PCI bus computers, respectively.
  • Page 39 DaqBoard/2002 Block Diagram* *The DaqBoard/2002c Block Diagram is the same, with exception that the /2002c board uses a compact-PCI Bus instead of a standard PCI bus. Connections Installation Reference Note: For the DaqBoard/2002 and compact-PCI DaqBoard/2002c installation procedure, refer to either the DaqBoard/1000 and /2000 Series Installation Guide or to the DaqBoard/2000c Series Installation Guide, as applicable.

  • Page 40: Daqboard/2003

    DaqBoard/2003 4 An a log Ou t pu t s DaqBoard/2003 and /2003c are high-speed plug-and-play data acquisition boards for PCI and compact-PCI bus computers, respectively. The boards are used for analog output and include four 16-bit, 100-kHz D/A converters. Up to four boards can be installed into a PC. A 100-pin connector on the boards provides access to the DAC analog output signals.
  • Page 41 1-18 Daq Systems and Device Overviews DaqBoard/1000 and /2000 Series User’s Manual 929095 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 42: Daqboard/2004

    DaqBoard/2004 4 An a log 4 0 D igit a l 4 Cou n t e r 2 Tim e r Ou t pu t I / O I n pu t s Ou t pu t s DaqBoard/2004 and /2004c are high-speed, multi-function, plug-and-play data acquisition boards for PCI and compact-PCI bus computers, respectively.
  • Page 43 DaqBoard/2004 Block Diagram* * The DaqBoard/2004c Block Diagram is the same, with exception that the /2004c board uses a compact-PCI Bus instead of a standard PCI bus. Connections Installation Reference Note: For the DaqBoard/2004 and DaqBoard/2004c installation procedure, refer to either the DaqBoard/1000 and /2000 Series Installation Guide or to the DaqBoard/2000c Series Installation Guide, as applicable.

  • Page 44: Daqboard/2005

    DaqBoard/2005 1 6 An a log 4 0 D igit a l 4 Cou n t e r 2 Tim e r Ou t pu t s I n pu t I / O I n pu t s DaqBoard/2005 and DaqBoard/2005c are high-speed, multi-function, plug-and-play data acquisition boards for PCI and compact-PCI bus computers, respectively.
  • Page 45 DaqBoard/2005 Block Diagram* *The DaqBoard/2005c Block Diagram is the same, with exception that the /2005c board uses a compact-PCI Bus instead of a standard PCI bus. Connections Installation Reference Note: For the DaqBoard/2005 and compact-PCI DaqBoard/2005c installation procedure, refer to either the DaqBoard/1000 and /2000 Series Installation Guide or to the DaqBoard/2000c Series Installation Guide, as applicable.

  • Page 46: Using Dbk Cards & Modules For Signal Conditioning

    Using DBK Cards and Modules for Signal Conditioning The DBK signal-conditioning cards and module are designed for use with DaqBooks, LogBooks, and various types of data acquisition boards, i.e., ISA, PCI, and compact-PCI types. The DBKs perform best when used with an acquisition device that can dynamically select channel, gain, and range. DBK cards and modules with dynamic channel and gain/range selection allow for high channel-to-channel scan rates with a variety of transducers.
  • Page 47 Reference Notes: Ü The software document modules, DaqView, DaqViewXL, and Post Acquisition Data Analysis User’s Guide, are not included as part of the hardcopy manual, but are available in PDF version. See the PDF Note, below. Ü Programming topics are covered in the Programmer’s User Manual (1008-0901). As a part of product support, this manual is automatically loaded onto your hard drive during software installation.

  • Page 48: Specifications - Daqboard/1000 Series Boards

    Specifications – DaqBoard/1000 Series Note: Specifications are subject to change without notice. I / O Com pa r ison M a t r ix for D a qBoa r d/ 1 0 0 0 Se r ie s Boa r ds D a qBoa r d An a log I n pu t An a log Ou t pu t...
  • Page 49 A/D Specifications Applicable to DaqBoard/1000, /1005 Type: Successive approximation, 200 kHz maximum conversion rate Resolution: 16 bits Conversion Time: 5 s Maximum Sample Rate: 200 kHz Differential Nonlinearity: 2 LSB maximum Integral Nonlinearity: 1 LSB maximum Missing Codes: None, over full operating temperature range Input Sequencer Applicable to DaqBoard/1000, /1005 Analog, digital and counter inputs can be scanned synchronously based either on an internal...
  • Page 50 Analog Outputs Applicable to DaqBoard/1000; does not apply to DaqBoard/1005 Two analog output channels are updated synchronously relative to scanned inputs, and clocked from either an internal onboard clock, or an external clock source. Analog outputs can also be updated asynchronously, independent of any other scanning in the system.
  • Page 51 Frequency/Pulse Generators Applicable to DaqBoard/1000, /1005 Channels: 2 x 16-bit Output Waveform: Square wave Output rate: 1 MHz base rate divided by 1 to 65535 (programmable) High level output voltage: 2.0 V minimum @ -3.75 mA, 3.0 V minimum @ -2.5 mA Low level output voltage: 0.4 V maximum @ 2.5 mA Accessories and Cables Applicable to DaqBoard/1000, /1005...

  • Page 52: Specifications - Daqboard/2000 Series Boards

    Specifications – DaqBoard/2000 Series Boards Note: Specifications are subject to change without notice. I / O Com pa r ison M a t r ix for D a qBoa r d/ 2 0 0 0 Se r ie s Boa r ds D a qBoa r d An a log I n pu t An a log Ou t pu t...
  • Page 53 Analog Specifications Applicable to DaqBoard/2000, /2001, /2005 A/D: Successive approximation, 200 kHz maximum conversion rate Resolution: 16 bits Channels: 16 single-ended or 8 differential, expandable up to 256 differential Conversion Time: 5 s Connector: 100-pin high-density edge-type Missing Codes: None, over full operating temperature range Input Voltage Ranges (software programmable via sequencer): Notes Accuracy (Note 2)
  • Page 54 Input Sequencer Applicable to DaqBoard/2000, /2001, /2002, /2004, /2005 Analog, digital and counter inputs can be scanned synchronously based either on an internal programmable timer, or an external clock source. Analog and digital outputs can also be synchronized to either of these clocks. Bus Mastering DMA is utilized to provide CPU and system- independent data transfers, insuring data acquisition performance irrespective of other system activities.
  • Page 55 4. Digital Pattern Triggering: 8 or 16-bit pattern triggering on any of the digital input ports. Programmable for trigger on equal, above, below, or within or outside of a window. Individual bits can be masked for “don’t care” condition. Latency: One scan period maximum 5.
  • Page 56 Pattern Generation Output Applicable to DaqBoard/2000, /2001, /2002, /2004, /2005 The P3 16-bit digital I/O port can be configured for 16-bit pattern generation. The pattern can be updated synchronously with an acquisition from a file. If pattern generation mode is utilized, then the D/A outputs can only be used in an asynchronous mode.
  • Page 57 Optional Accessories for DaqBoard/2000 Series Software: DaqView including drivers for DasyLab and LabView, eZ-PostView post-acquisition software, DasyLab Hardware: CA-37-x - Expansion cable. The “x” indicates number of devices on expansion side, for example, CA- 37-1 is a DB37-to-DB37 cable that provides expansion to 1 card. CA-37 cables are used to connect from P1 to P1, P2 to P2, or P3 to P3.

  • Page 58: Connections And Pinouts, Daqboard/1000 Series

    Connections and Pinouts, DaqBoard/1000 Series Overview …… 2-1 TB-100 Terminal Connector Option …… 2-2 Pinout for DaqBoard/1000 and DaqBoard/1005 …… 2-3 CAU T I ON Turn off power to all devices connected to the system before connecting cables or setting configuration jumpers and switches. Electrical shock or damage to equipment can result even under low-voltage conditions.

  • Page 59: Tb-100 Terminal Connector Option

    TB-100 Terminal Connector Option The TB-100 Terminal Connector option can be used to connect all signal I/O lines that are associated with a DaqBoard/1000 Series device. TB-100 connects to the DaqBoard’s 68-pin SCSI III connector via a shielded 3 ft., 68 conductor cable, p/n CA-G56. TB- 1 0 0 Pin ou t The “...
  • Page 60 Pinout for DaqBoard/1000 and DaqBoard/1005 Pin n u m be r s r e fe r t o t h e 6 8 - pin SCSI I I I fe m a le con n e ct or , loca t e d on t h e D a qBoa r d/ 1 0 0 0 a n d D a qBoa r d/ 1 0 0 5 boa r ds.
  • Page 61 Connections & Pinouts, DaqBoard/1000 Series DaqBoard/1000 and /2000 Series User’s Manual 929095 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 62: Connections And Pinouts, Daqboard/2000 Series

    Connections and Pinouts, DaqBoard/2000 Series Overview …… 3-1 DBK200 Series, P4 Connector Options …… 3-2 Pinouts for DaqBoard/2000 Series and /2000c Series Boards …… 3-8 CAU T I ON Turn off power to all devices connected to the system before connecting cables or setting configuration jumpers and switches.

  • Page 63: Dbk200 Series, P4 Connector Options

    The following matrix provides a quick comparison of the DBK200 Series adapter boards. Details for each board are provided in the DBK Option Cards and Modules User’s Manual (p/n 457-0905). An illustration and brief discussion of each DBK200 Series adapter board is presented after the following table. DBK200 Series, Adapter Board Matrix Screw Special...
  • Page 64 DBK201 The DBK201 P4-to-P1/P2/P3 adapter provides DB37 P1, P2, and P3 connectors. P1 is used for ANALOG I/O. P2 is used for DIGITAL I/O. P3 is used for Pulse/Frequency (Digital and Counter/Timer) I/O. DBK201’s P4 (100-pin connector) connects to a DaqBoard/2000 Series or /2000c Series board’s P4 connector via a CA-195 Cable.
  • Page 65 DBK205 The DBK205 provides 12 screw-terminal connections on one terminal block (TB1) for DaqBoard/2003 and DaqBoard/2003c. The signal lines on DBK205’s P4 connector correspond with P3-associated pins on the P4 connector of DaqBoard/2003 and /2003c. The DBK205 can connect directly to the 100-pin P4 connector on the DaqBoard/2003, or DaqBoard/2003c.
  • Page 66 DBK207 and DBK207/CJC The DBK207 and DBK207/CJC are carrier boards for 5B-compatible analog input modules. They each provide: two P1 connectors – for ANALOG I/O a 5 VDC power terminal footprints for sixteen 5B Modules 16 terminal blocks. In addition, DBK207/CJC provides Cold Junction Compensation. The DBK207 and DBK207/CJC each include a 100-pin P4 connector for use with DaqBoard/2000 Series and cPCI DaqBoard/2000c Series Boards.
  • Page 67 DBK208 DBK208 is a two-bank carrier board for optically-isolated Solid-State-Relay (SSR) modules. Each bank supports up to eight digital I/O modules. The banks can be independently set as “input” or “output” via jumpers (JP0 for Bank 0, and JP1 for Bank 1). The I/O modules are industry standard Opto-22 compatible, 5-volt logic level modules.
  • Page 68 DBK209 The DBK209 is a mini-adapter board suitable for both analog and digital expansion. The board provides three DB37 connectors (P1, P2, and P3). DBK209 connects to DaqBoard/2000 Series or /2000c Series P4 connector via a CA-195 cable. Other than the form factor, DBK209 is identical to DBK201. P1 is used for ANALOG I/O.

  • Page 69: Pinouts For Daqboard/2000 Series And /2000C Series Boards

    Pinouts for DaqBoard/2000 Series and /2000c Series Boards Reference Notes: You must set up DaqView for the particular DBKs in your system. If you are unfamiliar with the method of setting up DBKs in DaqView, or if you need a refresher, refer to the following documents as needed.
  • Page 70 P1 for DaqBoard/2000 Series and /2000c Series Boards Analog I/O The P1 DB37 connector is obtained with the use of one of the following: DBK200 DBK201 DBK202 DBK203 DBK204 The P1 DB37 connector DBK206 does not apply to DBK205 DBK207 or to DBK208.
  • Page 71 P2 for DaqBoard/2000 Series and /2000c Series Boards Digital I/O The P2 DB37 connector is obtained with the use of one of the following: DBK201 DBK202 DBK203 DBK204 DBK206 DBK208 DBK209 The P2 DB37 connector does not apply to DBK200, DBK205, DBK207, or DBK207/CJC.
  • Page 72 P3 for DaqBoard/2000 Series and /2000c Series Boards Pulse/Frequency/Digital I/O (Note 2) The P3 DB37 connector is obtained with the use of one of the following: (Analog Out DAC 3) DBK201 (Analog Out DAC 2) DBK202 (Note 1) DBK203 (Note 1) DBK204 (Note 1) DBK206...
  • Page 73 P4 to P1, P2 and P3 Correlation The following table lists the correlation between the P4 I/O lines and their respective P1, P2 and P3 pin locations on the DBK200 Series boards. Ground correlation is provided in a subsequent table. P4 Pin Signal Type...
  • Page 74 P4 Pin Signal Type Description P1, P2, P3 Correlation Port B bit 2 Dig I/O P2 Digital Port B, bit 2 -or- P2 pin 8 P2 expansion RESET Port B bit 1 Dig I/O P2 Digital Port B, bit 1 -or- P2 pin 9 P2 expansion WRITE Port B bit 0...
  • Page 75 P4 Pin Signal Type Description P1, P2, P3 Correlation Analog In Ch13 Analog Analog Input Chan 13 (SE) P1 pin 13 Analog Input Chan 5L (DIF) Analog In Ch5 Analog Analog Input Chan 5 (SE) P1 pin 32 Analog Input Chan 5H (DIF) Ground Analog Analog Signal Common...
  • Page 76 Ground Tables – P4 Pin to P1, P2, and P3 Ground Correlation Digital Common (DGND) P4 Pin DBK200 DBK201 DBK202 DBK206 DBK207 DBK208 DBK209 DBK203 DBK204 ------- ------- ------- P1-7 ------- ------- P1-7 ------- P2-11 P2-11 P2-11 ------- P2-11 P2-11 P2-13 P2-13 P2-13...
  • Page 77 3-16 Connections & Pinouts, DaqBoard/2000 Series DaqBoard/1000 and /2000 User’s Manual 898195 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 78: Ce-Compliance

    CE-Compliance Overview ……4-1 CE Standards and Directives …… 4-1 Safety Conditions ……4-2 Emissions/Immunity Conditions ……4-2 CE Enhancements for DBKs .…… 4-3 CE Cable Kits for DaqBoard/2000 Series and /2000c Series Boards…… 4-3 Overview CE standards were developed by the European Union (EU) dating from 1985 and include specifications both for safety and for EMI emissions and immunity.

  • Page 79: Safety Conditions

    For clarification, terms used in some Declarations of Conformity include: pollution degree: any addition of foreign matter, solid, liquid or gaseous (ionized gases) that may produce a reduction of dielectric strength or surface resistivity. Pollution Degree I has no influence on safety and implies: the equipment is at operating temperature with non-condensing humidity conditions;...

  • Page 80: Ce Enhancements For Dbks

    CE Enhancements for DBKs The following CE enhancements are described in the individual document modules of the DBK Cards and Modules User’s Manual (p/n 457-0905). DBK41/CE Edge Guard (for DBK5, DBK8, and DBK44) Applicable cables and connectors CE Cable Kits for DaqBoard 2000 Series and /2000c Series Boards Turn OFF the power to, and UNPLUG the host PC and externally connected equipment prior to removing the PC’s cover and removing (or installing) the DaqBoard/2000 Series [or /2000c Series] Board.
  • Page 81 Install the CE ORB 1. Remove the two screws that secure the standard [non-CE] ORB to the board (see figures). 2. Using the same screws, mount the CE ORB to the board. Tighten the screws snug, but do not over tighten.
  • Page 82 For cPCI DaqBoard/2000c Series Boards [cPCI Type] If you a installing the cPCI DaqBoard/2000c Series Board for the first time, refer to chapter 2 of this manual; or to the cPCI DaqBoard/2000c Series Quick Start Guide, prior to installing the board. Turn the compact PC’s power OFF.
  • Page 83 Secure the Grounding Pigtail to Cable CA-195CE Using Cable Clamps 1033-2009, 1033-2010, and two 4_40 x 5/16 screws, secure the Grounding Pigtail to the cable. Note that the Clamps must be positioned over the cable’s Copper Band as shown in the figure on page 4-5.
  • Page 84 Note: DaqCal is installed automatically from your data acquisition CD as a part of product support. This takes place during software installation. DaqCal’s default location is the IOtech DaqX Software folder, in the Programs group. 2. When DaqCal opens you will be prompted to select your device from a list. After doing so, simply follow the illustrated on-screen instructions.
  • Page 85 Calibration DaqBoard/1000 and /2000 Series User’s Manual 959495 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 86 Glossary Acquisition A collection of scans acquired at a specified rate as controlled by the sequencer. A signal of varying voltage or current that communicates data. Analog Analog-to-Digital A circuit or device that converts analog values into digital values, such as binary bits, for use in digital computer processing.
  • Page 87 Digital-to-Analog A circuit or device that converts digital values (binary bits), into analog signals. Converter (DAC) A DIP switch is a group of miniature switches in a small Dual In-line Package (DIP). Typically, DIP switch users set these switches to configure their particular application. The differential mode measures a voltage between 2 signal lines for a single channel.
  • Page 88 Trigger An event to start a scan or mark an instant during an acquisition. The event can be defined in various ways; e.g., a TTL signal, a specified voltage level in a monitored channel, a button manually or mechanically engaged, a software command, etc. Some applications may use pre- and post-triggers to gather data around an instant or based on signal counts.
  • Page 89 Glossary 959395 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

This manual is also suitable for:

Daqboard 2000 seriesDaqboard/2001Daqboard/2005Daqboard/1005

Table of Contents