Gemmy 38262 Assembly Instructions Manual

Minnie mouse tinsel sculpture

Advertisement

I NST RU C TIONS
WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
WARNING:
of age. As with all electrical products, precautions should be observed during handling and use to reduce the risk
of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard. To avoid the risk of electrical shock, always make sure the product is
unplugged from the electrical outlet before assembling, disassembling, or relocating.
WARNING:

IMPORTANT SAFETY INSTRUCTIONS

WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
1. This is an electrical product - not a toy! To avoid risk of fire, burns, personal injury, and electric shock, it should not be
played with or placed where small children can reach it.
2. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used
in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided,
contact a qualified electrician for proper installation.
3. This seasonal use product is not intended for permanent installation or use.
4. Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
5. Do not secure product wiring with staples or nails or place on sharp hooks or nails.
6. Do not let lamps rest on the supply cord or on any wire.
7. This product is equipped with push-in type lamps. Do not twist lamps.
8. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
9. Do not use this product for other than its intended purpose.
10. Do not hang ornaments or other objects from cord, wire, or light string.
11. Do not close doors or windows on the product, or extension cords, as this may damage the wire insulation.
12. Do not cover the product with a cloth, paper, or any material not part of the product when in use.
13. Do not place the product against carpeting, furniture, or any other fabric when in use.
14. This product employs overload protection (fuse). A blown fuse indicates an overload or a short-circuit condition. If the
fuse blows, unplug the product from the outlet. Also unplug any additional string or products that may be attached to
the product. Replace the fuse as per the user servicing instructions (follow product markings for proper fuse rating) and
check the product. If replacement fuse blows, a short-circuit may be present and the product should be discarded.
15. Read and follow all instructions that are on the product or provided with the product.
S AVE THESE INSTRUCTION S

USE AND CARE INSTRUCTIONS

1. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees
in which the needles are brown or break off easily. Keep the tree holder filled with water.
2. If the product is placed on a tree, the tree should be well secured and stable.
3. Before using and reusing, inspect the product carefully. Discard any products that have cut, damaged or frayed wire
insulation cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
4. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or
bushes, to avoid any undue strain or stress on the product conductors, connections and wires.
5. When not in use, store carefully in a cool, dry location protected from sunlight.
ELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years
This product is to be assembled by adults only.
1
38262 E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 38262 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gemmy 38262

  • Page 1 38262 E I NST RU C TIONS WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. WARNING: ELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years of age.
  • Page 2 Congratulations! You’re the proud owner of your very own Minnie Mouse Tinsel Sculpture from Gemmy! Below, we hope you’ll find the answers to many questions, and how to get maximum enjoyment from it for years to come! Please read over the directions carefully before installing and operating this item. Some assembly is required.
  • Page 3 3. Repeat the actions of step 2 to attach the right leg (F) to the body (see illustration 2). illustration 2 4. Insert the left arm (C) and the right arm (D) into the body (see illustration 3). illustration 3 5.
  • Page 4 6. Attach the head (A) onto the neck by sliding the post into the slot and tying up the circles with plastic ties. Then attach the ears (left/right) (H) onto the head. illustration 5 7. Attach the bow (I) onto the head. Then place the scarf (J) around the neck.
  • Page 5 CAUTION: The frame straps (Plastic ties) should not be placed around any conductor wire during assembly! Disassembly Instructions --- Please refer to assembly instruction above, but in reverse order. Approximate Assembly time:10-15 minutes. USER SERVICING INSTRUCTIONS Fuse Replacement WARNING: Risk of Fire: Replace fuse only with 3 Amp Max, 125 Volt fuse (provided with product).
  • Page 6 6. I have extra plastic Ties. What are these for? You may use these to further secure the product as desired. THESE INSTRUCTIONS ARE FOR ITEM NUMBER 38262 Visit WWW.GEMMY.COM for more information. ©2019 GEMMY INDUSTRIES CORP. 117 WRANGLER DRIVE, SUITE 100 COPPELL, TX 75019 U.S.A.

Table of Contents