Advertisement
Quick Links
WIFI ANTENNA CONFIGURATION
CONNECTING UNITS TO
THROUGH WIFI NANOSTATION LOCO M2
1
Connect NANOSTATION LOCO M2 to
100-240V Power
3
Configure Ethernet adapter in your PC
to get IP adress automatically
5
Go to "Wireless" "SSID" and click
"Select..." button
CM004-Configuración_wifi_antena_R0-EN
www.itc-cloud-manager.com
NOTE
The NANOSTATION LOCO M2 is pre-configured by ITC to:
IP Address: 172.17.245.1
User: Itc
Password: fertic
2
Connect Your Laptop/PC through
Ethernet cable
4
Open your internet browser and go to
http://172.17.245.1
Enter the username and password (Itc/fertic).
6
Select Wifi Network you want to connect,
and click "Select" button
CM004
address.
DATA SHEET
DATA SHEET
Advertisement
Summary of Contents for ITC CM004
- Page 1 WIFI ANTENNA CONFIGURATION CM004 CONNECTING UNITS TO www.itc-cloud-manager.com THROUGH WIFI NANOSTATION LOCO M2 NOTE The NANOSTATION LOCO M2 is pre-configured by ITC to: IP Address: 172.17.245.1 User: Itc Password: fertic Connect NANOSTATION LOCO M2 to Connect Your Laptop/PC through 100-240V Power...
- Page 2 Network has assigned an IP Address to Wifi Antenna (With UNIT Controller Connected through USB/RS485) and wait about 3 minutes Go to http://www.itc-cloud-manager.com to see your UNIT connected NOTE The GATE is pre-configured by ITC to work directly with NANOSTATION LOCO M2 configuration. DATA SHEET DATA SHEET CM004-Configuración_wifi_antenna_R0-EN...
Need help?
Do you have a question about the CM004 and is the answer not in the manual?
Questions and answers