Use Of The Software - Quintezz Locator User Manual

QUINTEZZ has also gathered data on locations. These data are updated on a regular basis with
the data that are placed on the forum by the users, and that can be checked by QUINTEZZ. These
data are available per country or group of countries on www.quintezz.com.
The proper functioning of your PC with Internet, the downloading of data etc. goes beyond the
QUINTEZZ LOCATOR guarantee. On www.quintezz.com you can view product information
online, purchase products and visit the forum. A forum is a meeting place where data on a certain
subject are exchanged. Users can exchange new data of locations, can ask each other questions,
can make suggestions etc. All owners of a QUINTEZZ LOCATOR can freely sign on as a forum
member so as to add information.The information on the forum is also available for non-members.
D-1. REGISTRATION IN THE FORUM
Before being able to place some data on the forum, you are to sign in as a member once. Therefore
you need to give the serial number of your QUINTEZZ LOCATOR, your e-mail address and other
relevant information.
How to use the forum is explained by means of a film that is available on the CD-ROM. You can start
the film by double-clicking the 'FORUM' file on the CD-ROM.
D-2. PLACING DATA ON THE FORUM
When you register with the forum, you can react to subjects on the forum. If you want to add a
new subject on the forum, you need to enclose a file with locations, because the purpose of the
forum is the exchange of locations.
D-3. SAVING DATA FROM THE FORUM
Everyone visiting the forum, can download locations from the forum.
E.

USE OF THE SOFTWARE

Before being able to use the software, you need to comply with the following conditions:
• The LOCATOR is on.
• The LOCATOR is connected to the PC.
• The 'Setting' button of the LOCATOR is pressed for 6 seconds, until the ringing signal is heard.
In the LOCATOR display three zeros are slowly blinking.
• The QUINTEZZ LOCATOR software is installed on the PC.
• The QUINTEZZ LOCATOR software is started. The following will appear:
By default, COM 1 is selected for communication. When it is necessary to use COM 2, this has to
be selected in the main screen. After the selection the software needs to be restarted.
E-1. WRITE QUINTEZZ DATA
By means of the PC software, you can save QUINTEZZ data in the LOCATOR. The old QUINTEZZ
data are automatically deleted. By pressing the 'Write System Data' button, this function is started
and the following will appear on the display:
Q u i n t e z z L o c a t o r
7 English