Voicebox (Network Answering Machine); Extending The Spc 7608N - SPC KAISER COMFORT User Manual

Voicebox (network answering machine)

You can forward the incoming calls to your operator's network answering machine
(Voicebox).
This function must be available and enabled by your network operator. New Voice-
box messages are signalled on your handset display by
network operator).
• Press and hold key
access code (see chapter "Handset settings").

Extending the SPC 7608N

The delivered handset is already registered on to base station. In standby the inter-
nal number of the handset is displayed.
You can register up to 5 handsets to your base station.
If you register your SPC 7608N handset with a "third party" base station or a "third
party" handset on your SPC 7608N base station (GAP), you may not be able to
use some functions or only to a limited extent.
Register new handsets
Accessory handsets must be registered to the base station.
• Before registering a handset to the base, you must press and hold the base
unit key for about 5 seconds, a tone is heard on the base. Release the key.
REGISTER
• Press , select
• Select the desired base station. Press
you have entered (flashing display).
• Once the base station has been found, you are requested to enter the system
PIN (0000 on delivery). Press
• If the registration is successful you will hear a confirmation signal.
to call your mailbox. You must first enter the voicebox
and press .
. The handset seeks the base station
.
SPC 7608N
(dependent on
101