Advertisement
Warning!
Accident and fatal injury risk for infants and children!
Never let children unsupervised with the packaging materials. There is a risk of suffocation.
Keep the product away from children.
The product is not a toy.
Mortal danger!
Make sure that you do not hit any electricity, gas or water lines when you drill into the wall. If neces-
sary, check with a pipe/cable detector before you drill into a wall.
Risk of injury!
Ensure that all parts are undamaged and properly assembled/fitted. In the event of incorrect
assembly/fitting there is a risk of injury. Damaged parts can affect safety and function.
Do not let children unsupervised. The product is not a climbing frame or tool. Make sure that
people, especially children, do not climb onto the product and/or lean against it. Injuries and/or
damage may result.
Care was taken in the manufacture of the product to avoid any sharp edges. Handle the indi -
vidual parts carefully so that any accidents/injuries during set-up and use are avoided.
When assembling/fitting the product, please be sure to wear protective gloves.
Ensure that the product is assembled/fitted only by competent adults.
Only set the product on a level surface.
Before using the product, check its stability.
Do not load the product with more than 175 kg per shelf. Otherwise there is a risk of injury
and/or damage to the product.
The part showing the maximum load must be fitted at a clearly visible height (at the front).
Ensure that the unit loading is evenly spread – avoid any overloading.
In order to avoid any potential damage to the floor, pull on protective caps (7).
After assembly, check that all parts are firmly connected together.
The shelf unit must be secured to the wall, otherwise a safety risk can occur.
Before securing the product to the wall, check whether the chosen wall is suitable for this.
Before securing the product to the wall, find out about appropriate fitting wall mounting mater-
ial for your wall. (These are not included with the product.)
Assembly
Remove the packaging material and dispose of it properly.
Check if all components of the listed parts are present.
To assemble the products, use only a rubber hammer.
When fitting the cross members, ensure that the carrier edge for the shelving points up.
Assemble the heavy-duty shelving according to instructions for use A–H.
Cleaning and maintenance
Do not under any circumstances use petrol, solvents of any corrosive cleaning agents.
For cleaning, use a light, slightly moistened, lint-free cloth and a mild cleaning agent.
Disposal
Dispose of packaging in local recycling containers.
When the product is no longer in use, you will be able to find out about ways to dispose of it
from your local authority or city administration.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 60282
Page 4
01
2021-1
Advertisement
