AVLink EPS Series User Manual

A range of large format projector screens with built-in electric motor controlled via the in-line switch or remote
control. The screen is housed in a white steel case with mounting brackets on either end, allowing installation
onto ceilings or walls. The screen itself has a weighted bottom bar to prevent the screen jamming in the case
or curling. Various sizes available for all types of installation such as classrooms, auditoriums or places of
worship.
Please read through this manual carefully before use. This product is strictly for indoor use only,

Features:

•
Fitted with In-line control switch
• RF remote control included
• Black border enhances the definition of the
projected image
• Adjustable drop and retract distance limiter

Installation:

Before installation, please ensure a mains socket is available within 1.5m distance of where the inline
controller is going to be installed and ensure the unit is not plugged in during the process of installation. This
electric projector screen is suitable for both wall and suspended ceiling mounting, it is important the unit is
installed accurately using a spirit level to ensure the screen can operate correctly & safely.
Wall Mounting

Screen drop adjustment:

All electric projector screens will be pre-adjusted before delivery. If adjustment is needed to suit your
application, please ensure the unit is switched off before you proceed. The drop adjusting screws are located
at the right-hand end of the projector screen (see diagram A below). A screen drop adjusting tool is included
Item refs: 952.321UK/952.322UK/952.323UK/952.324UK/952.325UK
please install this product in a dry, cool environment and away from sources of heat.
CAUTION!
•
Flame retardant and mildew proof
• Low noise electric motor
• Available in 4:3 and 16:9 formats
EPS Series
Electric Projector Screen
User Manual
Ceiling Mounting
952.321UK User Manual