Advertisement
Available languages
Available languages
Quick Links
Lamp
ON/OFF Switch
Plug
Thank you for purchasing our lighting
fixture.
Please clean with a soft, dry cloth ONLY!
Do not use cleansers.
www.hudsonvalleylighting.com
IMPORTANT:
Always unplug the power before installing or replacing bulb
Shade
and before cleaning or other maintenance.
Ring
INSTALLATION
1. Remove the table lamp and parts bag(s) from the carton. Before
discarding the carton, double check packing to make certain that all
parts are found.
2. Attach the shade onto the socket then secure with the ring.
3. Install the lamp. The fixture is rated for 4 watt type T LED lamp.
DO NOT EXCEED RECOMMENDED WATTAGE !
4.
Plug cord into wall outlet. ON/OFF switch on cord.
5. Restore power to circuit at breaker or fuse box.
L3730
Advertisement
Related Manuals for hudson valley L3730
Summary of Contents for hudson valley L3730
- Page 1 L3730 IMPORTANT: Always unplug the power before installing or replacing bulb Shade and before cleaning or other maintenance. Ring INSTALLATION 1. Remove the table lamp and parts bag(s) from the carton. Before discarding the carton, double check packing to make certain that all Lamp parts are found.
- Page 2 L3730 Abat-jour IMPORTANT: Bague Shade Toujours débrancher complètement le circuit électrique avant l’installation ou le remplacement d’une ou des Ring ampoule(s) ou avant de nettoyer, ou d’entreprendre tout Ampoule autre entretien. Lamp INSTALLATION 1. Retirer la lampe de table et le ou les sachet(s) avec accessoires du carton.
Need help?
Do you have a question about the L3730 and is the answer not in the manual?
Questions and answers