Summary of Contents for Geberit 115.817.11.5
- Page 1 Maintenance Manual Instandhaltungsanleitung Manuel d'entretien Istruzioni per la manutenzione...
-
Page 2: Table Of Contents
Safety notes ....................................... 3 Explanation of symbols .................................. 3 Product description................................ 4 Structure......................................4 Operation................................... 5 Settings using the Geberit Service Handy..........................5 Setting the flush time manually ..............................10 Maintenance ................................... 12 Troubleshooting ..................................... 12 Cleaning the cover plate................................12 Replacing the batteries ................................ -
Page 3: Safety
Safety Target group Maintenance and repair on this product may only be performed by skilled persons in accordance with EN IEC 62079:2001. Safety notes • Use only original spare parts when making repairs • Do not modify the product or add any additional modules Explanation of symbols Table 1: Symbols in the instructions... -
Page 4: Product Description
Product description Structure 1 Cover plate 2 Infrared control 3 Mounting frame 4 Battery compartment 5 Power supply unit 6 Solenoid valve with flow limiter 7 Stop valve with throttle 8 Section seal D64372-001 © 12-2013 966.444.00.0 (00) -
Page 5: Operation
The infrared interface for communication with the Geberit Service Handy is located in the middle of the cover plate. To make any settings, the Geberit Service Handy must be aimed at this area from a distance of 20 to 30 cm. - Page 6 Menu item Description Application Adjustment Factory [EN] range setting [DE] Block flush. In the event of detection On = <OK> – [BlocFlush] No flush is actuated. The LED flashes malfunctions Off = <OK> [Blockiere] twice every six seconds. The function is deactivated automatically after ten hours Empty pipe.
- Page 7 Table 3: Programs Menu item Description Application Adjustment Factory [EN] range setting [DE] Select covered urinal operation. When the open cover of On = [ON] Off = [OFF] [CoverOps] Switches operation with the the covered urinal Off = [OFF] [Deckel-UR] covered urinals on or off blocks the sensor Enable manual flush.
- Page 8 Table 4: Parameters Menu item Description Application Adjustment Factory [EN] range setting [DE] Set flush time. Optimum flushing out of 3–15 s [...] 4 s [4] [FlshTime] Duration of the flush after one use the urinal ceramic [Spülzeit] Set detection time. Prevents flushes due to 3–15 s [...] 7 s [7]...
- Page 9 Table 5: Counters Menu item Description Output [EN] [DE] Total number of days of operation. [...] days of [Days?] Displays the number of days of operation since commissioning operation [SumBetrT?] Total number of uses. [...] uses [Uses?] Displays the total number of uses since commissioning [SumBenut?] Total number of flushes.
-
Page 10: Setting The Flush Time Manually
Setting the flush time manually For battery-operated urinal flush control: disconnect the plug connection between the control and the battery for at least 20 seconds and then reconnect it. 2 mm 00:00:20 90º 90º Within five seconds hold your hand around 5 cm away from and in front of the control. - Page 11 2 mm 90º 90º D64372-001 © 12-2013 966.444.00.0 (00)
-
Page 12: Maintenance
Never use aggressive cleaning agents that contain chlorine or are acidic, abrasive or corrosive. Clean the cover plate with mild cleaning agents and water. Use a soft cloth. Geberit recommends the GeberitAquaClean cleaning set (article number 242.547.00.1) for cleaning the cover plate. D64372-001 © 12-2013... -
Page 13: Replacing The Batteries
Replacing the batteries Prerequisites Two replacement batteries (type 1,5 V Mignon/AA/LR6/AM-3) are ready. 2 mm 90º 90º D64372-001 © 12-2013 966.444.00.0 (00) -
Page 14: Replacing The Cover Plate
Replacing the cover plate 2 mm 90º 90º 2 mm 90º 90º D64372-001 © 12-2013 966.444.00.0 (00) -
Page 15: Replacing The Control
Replacing the control 2 mm 90º 90º 2 mm 90º 90º D64372-001 © 12-2013 966.444.00.0 (00) - Page 16 Disconnect the plug connections for the mains-operated urinal flush control. PH 3 Disconnect the plug connections for the battery-operated urinal flush control. Connect the plug connections for the mains-operated urinal flush control. PH 3 Connect the plug connections for the battery-operated urinal flush control.
-
Page 17: Replacing The Solenoid Valve
Replacing the solenoid valve 2 mm 90º 90º 2 mm 90º 90º Disconnect the plug connections for the mains-operated urinal flush control. D64372-001 © 12-2013 966.444.00.0 (00) - Page 18 Disconnect the plug connections for the battery-operated urinal flush control. PH 3 D64372-001 © 12-2013 966.444.00.0 (00)
- Page 19 D64372-001 © 12-2013 966.444.00.0 (00)
- Page 20 PH 3 Connect the plug connections for the mains-operated urinal flush control. 2 mm 90º 90º Connect the plug connections for the battery-operated urinal flush control. D64372-001 © 12-2013 966.444.00.0 (00)
-
Page 21: Replacing The Regulating Screw
Replacing the regulating screw Disconnect the plug connections for the mains-operated urinal flush control. 00:00:07 Disconnect the plug connections for the battery-operated urinal flush control 2 mm 90º 90º D64372-001 © 12-2013 966.444.00.0 (00) - Page 22 PH 3 13 mm 13 mm D64372-001 © 12-2013 966.444.00.0 (00)
- Page 23 Connect the plug connections for the battery-operated urinal flush control. PH 3 2 mm Connect the plug connections for the mains-operated urinal flush control. 90º 90º D64372-001 © 12-2013 966.444.00.0 (00)
-
Page 24: Checking The Flush Actuation
Checking the flush actuation 00:00:07 Geberit International AG, Schachenstrasse 77, CH-8645 Jona T +41 55 221 63 00 F +41 55 221 63 16 documentation@geberit.com www.geberit.com D64372-001 © 12-2013 966.444.00.0 (00)
Need help?
Do you have a question about the 115.817.11.5 and is the answer not in the manual?
Questions and answers