Ecolab DPP-450 Quick Start Manual

PestService DPP-450 Printer

1. CHARGE BATTERY

• Connect the power adapter for at least 4 hours

2. LOAD PAPER

• Turn the printer OFF
• Open the paper door by pressing the Paper Cover Release button on the
top cover
• Place the paper supply roll into the paper supply well.
• Make sure the paper unwinds from the bottom, and 2-3 inches of
paper extends beyond the top of the well
• Close paper door and press firmly until it clicks
• Turn the printer ON
• Verify that the paper advances correctly by pressing the
button

3. CONNECT OR RECONNECT PRINTER TO PESTSERVICE

This is a one-time setup, after which your iPhone will connect to your printer
automatically.
• Ensure that you have closed out of Pest Service
• Double Tap the Home
• Swipe UP on Pest Service
• This closes out the app
• Ensure the printer is ON
• From your iPhone, tap 'Settings'
• Within Settings, tap 'Bluetooth' and slide it on
• Select DPP-450 from list under
• A pop-up will display, tap 'Pair'
• During your next service, when it is time to print,
select the DPP-450 printer from 'Print Options'
Paper Feed
FIRST
button
'My Devices'
Quick Start Guide
Paper Cover
Release Button
Power Button
Print Button
USB Port
Charging Jack
DPP-450
Paper Cover Latch
Paper Cover
Paper Feed
Button
USB Port
Charging Jack
Battery