Advertisement
STREX
LED STRIP
INSTRUCTION MANUAL SP148
Thanks for choosing Strex! Read the manual carefully, for
correct and safe operation of the product. Always follow these
instructions for safe usage.
If you have any questions about the product or encounter
problems, you can contact us by email: info@strex.nl
English
Advertisement
Table of Contents
Related Manuals for strex SP148
Summary of Contents for strex SP148
- Page 1 STREX LED STRIP INSTRUCTION MANUAL SP148 English Thanks for choosing Strex! Read the manual carefully, for correct and safe operation of the product. Always follow these instructions for safe usage. If you have any questions about the product or encounter...
- Page 2 PACKAGE CONTENTS 44 KEY 24 KEY with 2 outputs with one output LED STRIP LIGHTS IR Remote controller IR Receiver Power Supply 4-PIN INSTALLATION Installation Steps Arrow to arrow STEP 1: STEP 2: Connect the 4-pin connectors of the Connect the IR receiver to the DC wire strip and IR receiver arrow to arrow...
- Page 3 STEP 3: Tear off the plastic on the adhesive tape and stick the strip to any smooth, clean and dry surface Please be careful not to tear off the adhesive tape Please make sure the surface is smooth, dry and clean. DO NOT stick the led strip on surfaces, such as wool, fabrics, dust, rough plastic and frosted glass...
- Page 4 Please pull out the transparent film from the bottom of the IR remote to ensure the battery is powered properly. Pull out the transparent film Make sure the IR remote aims at the IR receiver within the sensing distance. The angle of the IR receiver is 120 degrees and the sensing distance is 8 meters.
- Page 5 IR REMOTE CONTROLLER INDICATION How to use the DIY function on the remote controller? When the DIY button is pressed for the first time, the control will enter DIY color mode. You can create a own color for every single DIY key. Pressing the DIY key again will make you leave the DIY color mode.
- Page 6 24 KEY Remote 1. LED brightnesss adjustment UP 2. LED brightness adjustment down 3. OFF button 4. ON button 5. LED color buttons (16 colors) Red/green/blue/white/orange/pea green / dark blue/dark yellow/cyan/brown/ yellow/light blue/pink/straw yellow/sky blue /purple 6. Flash on/off 7. Strobe button: Fast changing lighting SMOOTH 8.
- Page 7 For permission requests at the address below. STREX SBD Trading B.V. (Strex Europe) Noorwegenstraat 6-A4 7418BC Deventer The Netherlands info@strex.nl - www.strex.nl...
Need help?
Do you have a question about the SP148 and is the answer not in the manual?
Questions and answers