Advertisement
Available languages
Available languages
Installation
1
Preparing for Installation
Remove the old toilet seat from the toilet, if necessary.
Insert the bolts (AA) into the new toilet seat hinges (A)
and secure by turning clockwise.
Place washers (BB) onto the bolts (AA).
Care and Cleaning
Re-tighten nuts after seat has been in use for several weeks.
Do not use abrasive cleaners or corrosive chemicals for daily cleaning.
Clean with soft damp cloth using mild detergent.
2
2
A
AA
BB
4
Securing the Toilet Seat
Position the toilet seat onto the toilet, and ensure the hinge
bolts are inserted through the mounting holes in the toilet.
Secure each bolt (AA) with a washer (BB) and nut (CC).
Do not over-tighten.
Check the tightness of the seat (A). If needed, repeat the
previous step until the desired tightness is achieved.
A
BB
AA
CC
Advertisement
