Advertisement
DO NOT operate the glue gun when you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT get glue on your skin.
DO NOT inhale any vapour given off by the glue.
DO NOT carry the glue gun with your finger on the power switch, or carry by the power cable.
DO NOT use the glue gun where there are flammable liquids, solids or gases such as paint solvents, etc.
DO NOT leave the glue gun operating unattended.
When not in use switch the glue gun off, remove plug from the power supply, store the tool in a safe, dry child proof area.
2.
INTRODUCTION
Composite housing with trigger feed. GS/TUV approved. Fitted with 1.3mtr of cable with BS approved 3 pin 230V non-rewirable
fused plug. Includes two glue sticks.
3.
OPERATION
3.1
PREPARATION
3.1.1
Ensure the work surface is clean and clear before engaging in the task in hand.
3.1.2
Steady the workpiece with an appropriate vice or clamp.
3.1.3
Insert the glue stick firmly into the inlet and plug the glue gun into the mains.
3.2
USING THE GLUE GUN
3.2.1
Squeeze the trigger several times to set the stick into the gun.
3.2.2
Leave the gun to warm up for approxiamateley 5 minutes.
3.2.3
Squeeze the trigger firmly until glue flows from the nozzle.
3.2.4
When the task is complete, unplug the gun and leave to cool.
3.2.5
No cleaning is required. DO NOT attempt to remove the glue stick from the gun as this may cause damage to the product
and/or personal injury.
4.
ENVIRONMENTAL INFORMATION
4.1
CHEMICAL COMPOSITION
4.1.1
Material:
4.2
TECHNICAL SPECIFICATIONS
4.2.1
Softening Point:
4.2.2
Solidify Time:
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
EVA (70%), Resin (30%)
> = 82°C
4-10 seconds
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
AK292 Issue: 3 - 09/02/10
Advertisement
