Power Tec 92489 Instructions

Safety Warnings - please read
• Wear eye and hand protection when using this tool kit.
• Always carefully clean the tool components after each use.
• Keep the tool components safe and tidy in the supplied case.
• Do not use the kit for any purpose other than for which it is designed.
Our products are designed to be used correctly and with care for the purpose
for which they are intended. No liability is accepted by the Tool Connection for
incorrect use of any of our products, and the Tool Connection cannot be held
responsible for any damage to personnel, property or equipment when using the
tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided
has been designed to offer general guidance for a particular tool's use and while
all attention is given to the accuracy of the data no project should be attempted
without referring first to the manufacturer's technical documentation (workshop or
instruction manual) or the use of a recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to
alter specifications and components without prior notice. It is the responsibility of
the user to ensure the suitability of the tools and information prior to their use.
www.toolconnection.co.uk
Parking Distance Sensors
Hole Cutter Set
Instructions
92489_Instructions_V3
www.toolconnection.co.uk
Part No. 92489