Related Manuals for Orlaco SideEye
Summary of Contents for Orlaco SideEye
- Page 1 SRD Interface Box SideEye Set A System manual No. SM0974113 A 01 Art. No: 0403130 8/2020 SideEye Set A English...
- Page 2 Interface Box with Ext Speaker; commercial purpose only. The camera/display systems from Art. No. 0504820 Orlaco comply with the latest CE, ADR, EMC and mirror-directive regulations, where applicable. All products are manufactured in accordance with the ISO 9001 quality management system, IATF 16949 quality automotive, ISO 14001 environmental management systems, where applicable.
-
Page 3: Table Of Contents
14. General terms and conditions 15. Version details 1. Introduction The SideEye Set A system has a small, rugged short range The system is functional in all radar sensor for use in heavy-duty applications such as possible loading states of the... -
Page 4: Mounting Sensor
Before you Begin designed to supplement other Prior to installing the Orlaco SideEye System take time to safety practices and/or devices. The familiarize yourself with all of the all documentation, theory vehicle operator is always the first of operation, and system components. -
Page 5: Initial System Power Up And Test
System manual 4. For the pigtail, drill a 38 mm hole for the sensor connector and mating connector. 5. Secure the sensor to the equipment using the supplied hardware, with a maximum 2.49 Nm torque. 3. Initial System Power Up and Test Move the vehicle to an open space larger than the system detection zone to test. -
Page 6: System Overview
Connect the white wire of the body harness to vehicle ground. Optional; Not in the Set External speaker 5.1. SideEye Set Contents with LED • SRD Sensor “” Camera FAMOS 118° • Monitor 7” RLED with bracket •... -
Page 7: Monitor Service Menu
System manual 6. Monitor Service Menu The SideEye monitor is programmed in the factory. All necessary settings are made. You can check this by entering the service menu. See Figure 4, 5 and the monitor manual.) After installation open the info Page in the service menu and scroll to the last page. -
Page 8: Optical Signaling
System manual 8. Optical signaling The Monitor shall be at least 30° to the right of the viewing angle of the vehicle driver. See figure 7. Ocular Reference Point 9. Monitor placement See figure 8 The correct placement of the monitor depends on the type of the vehicle. - Page 9 System manual Monitor placement Figure 8 Good Moderate Good Good Good Good Moderate Moderate Moderate Moderate 40 cm 75 cm 150 cm 40 cm 40 cm 40 cm 40 cm 75 cm 75 cm 75 cm 75 cm 150 cm 150 cm 150 cm 150 cm...
-
Page 10: Drilling Template
System manual 10. Drilling template ∅5,6 x 4 63,5 Units in mm, Scale 1:1 SM0974113 A 01... -
Page 11: Maintenance
The SideEye system is intended as an Object Detection System and should not be relied upon as your first line of defense for the safe operation of the equipment. It... -
Page 12: Disposal
Min. bend radius (R) = 50mm ld be tightened with 14. General terms and conditions the preferred torque Orlaco Products BV is not liable for damage resulting from objects inadequate servicing, incorrect usage or alterations made monitor are closer than... -
Page 13: Version Details
System manual 15. Version details Version A 01. First issue, August 2020. SM0974113 A 01... - Page 14 ORLACO Orlaco is a Manufacturing company that specializes in making cameras and monitor systems for commercial vehicles, fork-lift trucks, cranes, off shore and maritime. Our objective is to design and produce camera systems for the professional market that improve the drivers’ view and increase operating efficiency.
Need help?
Do you have a question about the SideEye and is the answer not in the manual?
Questions and answers