Page 1
• SFX Mods Voice Shifter™ voice modulator with pre-set sound effects • micro-SD card with adaptor • SFX Mods cable with 4 push buttons (not shown) or optional touch sensors (shown) • SFX Mods 2.5mm omni-directional microphone, shown (for use with mask) •...
Page 4
No washing machines. It could damage the connector parts. With a little care you will be able to enjoy your harness for a long time. Here are detailed instructions: - remove speakers, modulator box, battery bank, microphone, and wires from the harness. - Wash carefully by hand at max 30 °C/86°...
Page 5
Microphone Placement for use Regardless of which of our mics you use, it should be taped to the cheek, approximately 1/2" from the side of the mouth when using our omnidirectional mic. Alternatively, you can tape the mic to the side of nose when using our omnidirectional mic if mask covers nose but does not cover mouth.
Page 6
How do you recharge the battery? A: Battery Charging Method: First plug wall charger to the wall outlet, green light; then plug into to the battery. Turn the battery power switch on “Line”. The battery indicator lights will light up. The charger output end is attached to the battery “DC IN/OUT”. The red light will show on wall plug.
Page 7
How do I operate the buttons/touch sensors for play back? • One touch to the button/sensor to play pre-set sound effect, • Press twice to loop pre-set, • touch same pre-set again to stop or • press another pre-set button/sensor to stop one and play another. Four pre-set sounds can be played back using the buttons or touch sensors.
Page 8
For more help see our FAQ page on our webpage: https://www.sfxmods.com/faq ONE-YEAR LIMITED WARRANTY: SFX Mods, LLC products are warranted to be free from defects in materials or workmanship https://www.sfxmods.com/warranty for one year from date of purchase. Scan QR Code for more details or go to SFX Mods, LLC St.
Need help?
Do you have a question about the VoiceShifter and is the answer not in the manual?
Questions and answers