Assembly; Operation - Ryobi ONE+ PAD01 Operator's Manual

18 v speaker with bluetooth wireless technology
Table of Contents

Advertisement

Available languages

Available languages

WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
The speaker is not waterproof. Do not submerge in
liquid. Failure to heed this warning could result in serious
personal injury.
NOTICE:
Always refer to the manual for any device recommended
for use as an attachment or accessory. Proper use of
any device, when attached to the speaker, is the sole
responsibility of the operator. Improper use may damage
the device or the product.
WARNING:
This speaker is capable of producing sound levels that
can be dangerous to long-term hearing. Listening to
music at high volume for any period of time can cause
noise-induced hearing loss. The higher the volume, the
less time required before your hearing could be affected.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.

OPERATION

APPLICATIONS
You may use this product for the following purposes:
 Charging USB capable devices
 Streaming audio from BLUETOOTH
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 9.
 Place the battery pack into the battery port, aligning the
rib on the battery pack with the groove in the battery port.
 Make sure the latches on the battery pack snap into
place and battery pack is secured in the speaker before
beginning operation.
NOTE: Leaving the battery pack connected for long
periods of time will drain the battery pack. Always
disconnect battery packs after use.
 Depress the latches to remove the battery pack.
NOTE: Always remove battery pack from speaker when
not in use.
NOTE: The battery pack should be recharged after
approximately five hours of use to reduce the possibility
of damage. Repeated deep discharge of the battery may
decrease storage capacity and battery life.
For complete charging instructions, see the operator's
manuals for your battery pack and charger.
6 - English
enabled devices
®

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

One+ pad01b

Table of Contents