OWL MDM-1 Fox User Manual
  1. Manuals
  2. Brands
  3. OWL Manuals
  4. Toy
  5. MDM-1 Fox
  6. User manual

OWL MDM-1 Fox User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWLplane.com
Rev. 1.2
Print Your Plane As Many As You Like

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MDM-1 Fox and is the answer not in the manual?

Questions and answers

Summary of Contents for OWL MDM-1 Fox

  • Page 1 OWLplane.com Rev. 1.2 Print Your Plane As Many As You Like...

  • Page 2: Table Of Contents

    OWLplane.com Table Of Content OWLplane 3D Printed Models ..................3 OWL MDM-1 Fox......................4 Specification ......................4 Center of Gravity (CoG)..................4 Recommended Setup....................5 Tools and Materials ....................5 Hardware Needed ....................6 Setup for Servo Travel/Throw................7 3D Printed Motor Mount, Propeller Spinner, Collet and Spar......8...

  • Page 3: Owlplane 3D Printed Models

    OWLplane 3D Printed Models Thank you for your interest/support/purchase of our RC Flying Models. It is all started in 2108 with the introduction of 3D Printer Technology (becoming our hobby). After having understand much with the technology, we continued creating and developing RC Flying Models. Once we feel that the designed Models are fun to fly, easy to assembly, acceptable strength and weight, it is time to share and introduce the Models to the market.

  • Page 4: Owl Mdm-1 Fox

    OWLplane.com OWL MDM-1 Fox Specification Wing Loading : 46.8 - 49.4 gr/dm^2. AUW/Flying Weight : 1.800 - 1.900 gr (with battery 2200mah 4s). Wing Area : 38.5 dm^2. Wing Cube Loading (WCL) : 7.5 - 7.9. Flight Performance Category : Trainer Aerobatic.
  • Page 5 OWLplane.com Nose Heavy Correction Available as an Option ▷ When using heavy spinner and also attaching main gear extension, OWL MDM-1 Fox may end up in nose heavy condition. ▷ Many ways to make correction for this condition, one of them is to use "FUSELAGE-7 # P3_H15 v1.1" and "FUSELAGE-7-LID # P3_H15 v1.1"...

  • Page 6: Recommended Setup

    Recommended Setup Motor Options : 3548 with 790KV/900KV/1100KV motor type (already tested it with 900KV, should work also with 790KV - 1100KV, see options above but not limited to). Servo Options : 12gr Servos for Aileron, Flap and Rudder and 17gr Servo for Elevator (see some options above but not limited to).

  • Page 7: Hardware Needed

    OWLplane.com Hardware Needed For Fuselage and Canopy: ▷ M3 x 0.5mm thread x 12mm screws with their washers for outrunner motor to motor mount wall - 4x. ▷ Self tapping screw M3x20mm or M2.5x20mm with their washers for mounting motor wall to the fuselage (Fuselage - N0) - 6x.

  • Page 8: Setup For Servo Travel/Throw

    Setup for Servo Travel/Throw Suggested setup for medium travel/thrown are depicted below and you may adjust the setup according to your need. Aileron A = 12 - 15mm. Flap B = 15 - 20mm. Flap C = 35 - 45mm. Elevator D = 12 - 15mm.

  • Page 9: 3D Printed Motor Mount, Propeller Spinner, Collet And Spar

    Good spinner should be available in your local hobby store or online store, even that spinner, you still need to balance it before using it. OWL MDM-1 Fox Spinner and Collet Requirement : 70mm Diameter Size Spinner.
  • Page 10 Spar Requirement OWL MDM-1 Fox uses 2 x “10mm OD – 1000mm Long” and 1 x “12mm OD – 500mm Long” Fiber Carbon Tube as Spar Page : 10...
  • Page 11 AGE RECOMMENDATION 14+ NOT FOR CHILDREN UNDER 14 YEARS. THIS IS NOT A TOY! By using our download files, an RC Model Airplane can be Always keep the RC Model Airplane in view and under control. manufactured using a 3D Printer from our Model Design. Always keep the transmitter switched on when the RC Model Airplane By purchasing our Model Design, you are responsible for safe is switched on.

Table of Contents