Advertisement
Quick Links
Contents List
wooden board
wooden board
wooden board
wooden board
wooden strip
round rod
nails
The nesting box is suitable for the following bird species:
dipper, wagtail, grey wagtail, robin, gray-billed catchfly, red-tailed wagtail, and sometimes red-tailed hare
115.338
Bird Nesting Box
Qty
Size (mm)
1
350x150x20
1
300x200x20
1
200x200x20
1
150x150x20
1
500x40x20
1
ø10x100
30
Please Note!
The Opitec Range of projects is not intended as play toys for young
children. They are teaching aids for young people learning the skills
of craft, design and technology. These projects should only be under-
taken and operated with the guidance of a fully qualified adult. The
finished projects are not suitable to give to children under 3 years
old. Some parts can be swallowed. Danger of suffocation!
Required Tools:
fine saw
rough rasp
wood glue
ruler
(water proof)
hammer
round file
Designation
Part No.
side parts
1
roof/ frontside
2
back wall
3
base plate
4
hanging strip
5
perch
6
nails
7
pricking awl
drill:
ø 10mm
sandpaper
pencil
Advertisement
Summary of Contents for Opitec Bird Nesting Box 115.338
- Page 1 Please Note! The Opitec Range of projects is not intended as play toys for young children. They are teaching aids for young people learning the skills of craft, design and technology. These projects should only be under- taken and operated with the guidance of a fully qualified adult.
- Page 2 Instructions 115.338 Bird Nesting Box: Transfer the dimensions to the wooden board (1). Use the saw to saw Transfer the dimensions to the wooden board (2). Cut it with the fine apart the wooden board and clean the saw cuts. saw and clean the saw cuts..
- Page 3 Instructions 115.338 Bird Nesting Box ø10 Mark the drill ø 10mm with the pricking awl on the wooden board Glue the round rod (6) with wood glue into the hole (ø 10mm) in the (2a) according to the dimensions and then drill through wooden board (2a).