Summary of Contents for Adastra LS26
- Page 1 LS26 Line Splitter 1:12 / 2:6 Item ref: 953.022UK User Manual Version 2.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 • The LS26 is designed to be installed free-standing or in a standard 19” rack. • Ensure that no heavy items are placed on top of the LS26, which may cause damage to the unit. Cleaning • Use a soft cloth with a neutral detergent to clean the housing as required.
- Page 3 Applications The LS26 is a signal distribution tool which can be used to split either 2 mono signals into 6 copies of each – or – a single mono signal into 12 copies of the original. These are boosted back up to line level and each given a volume control.
- Page 4 MONO into 12 outputs – on the MODE selector switch at the rear. Check input signal(s) for gain level by playing the sound source into the LS26. If the CLIP indicators light up, reduce the output level of the signal source until the clipping is eliminated.
Need help?
Do you have a question about the LS26 and is the answer not in the manual?
Questions and answers