Kitsound FUNK35 User Manual page 7

Instructions for use
Getting started
Charging the battery
Give the earbuds a full charge before their first use.
1. Connect the Micro USB Charge Cable to the Micro USB Charging
Port (2) and plug into power. The charging base LED Indicator (1)
will be red whilst charging which will take up to 1.5 hours
2. Once fully charged the Charging Base LED Indicator (1) will turn off
Note: The first charge may take up to 2 hours to complete.
12
Pairing the earbuds to your device
1. Pick up the two headsets from the charging base to power on
automatically, the two headsets will enter auto-pairing mode.
The two headsets connect with each other after a few seconds
2. Turn on your iOS, Android, or Windows device's Bluetooth ON
and search for new devices
3. Select 'KS Funk 35' from the list of found devices. If asked for
a passcode, enter '0000' or '1234' and the device will pair
4. Once connected, an audio tone will sound and the LED
Indicators (4) will flash blue. You can then answer the phone
and listen to your music
[continued...]
13