Aethra BGF1001 Technical Specifications

BGF1001
E1 MONITORING SYSTEM
OVERVIEW
The plug & play system for PRI access Aethra
solution for every E1 user. BGF1001 is the right tool to understand where
the problem on your E1 line is located.
Just plug the device toward the PRI access and verify, through
appropriate LEDs, every aspect of physical layer and so the status of
all alarms and errors present on line in both direction, from the Central
and from the Terminal Equipment.
BGF1001 provides also synchronization and D channel information as
well as activity and availability of each of the 30 B channels belonging
to the access under analysis. Multi-colored LEDs interpret the status of
the call from first setup to disconnection. Every channel's activity is
available at a glance.
Like every Aethra ® 's test sets, BGF1001 may be remotely managed and
controlled via RS232 or Ethernet port for different purposes such as
access monitoring activities. In conjunction with rackshelf TGA1012 PRI
monitoring device and MTX200 matrix, the system will become
definitively the easiest and useful tool aimed to continuous monitoring,
maintanace and troubleshooting for multiple E1 lines.
® BGF1001 ™ , is the best
E1
™
PBX
Plug & Play system
Instantaneous monitoring of E1 and G.704 link
Quick line status
All calls activity, errors and alarms report
Stand-alone or part of a system
Used together with the TGA1012 system and
MTX200 for multiple E1 lines control
FEATURES AT A GLANCE
Reliable plug & play device for quick and simple
PRI line analysis
Remote management through RS232 serial or
Ethernet port
B channels activity with multi-colored LEDs and
call status report
Easy alarms, errors and synchronization detection
from user and network direction
Layer 2 and Layer 3 D channel activity
Aimed to Call Center, Bank, Government
PC108