Bazoongi Dino Manual

Our Dino Tent is one of our latest Bazoongi Play Structures. It is made of industrial approved spun
bonded material of bright and rich colors. Our innovative design allows for easy assembly, and the revo-
lutionary G3 poles add strength to the structure. Enjoy your Play Structure and be sure to contact us for
any further information.
PLEASE READ ALL OF THE DIRECTIONS PRIOR TO ASSEMBLY. DO NOT APPLY EXCESSIVE
FORCE TO THE POLES DURING ASSEMBLY. ASSEMBLE ONLY WITH ADULT SUPERVISION.
Care & Safety Instructions
This item is for indoor use only.
DO NOT WASH! Clean only with a damp cloth.
1. Diagram 1
Assemble all of the segments of the shock corded poles.
Please bend the poles to form a circle.
Bottom frame with yellow tape
(Red tag)
3. Diagram 3
Insert the 3 piece poles into the top frame connectors.
Dino Tent
Top frame with lime green
tape
2 sections x 3 pieces with purple tape
Keep this tent away from heat sources or open flame.
Never store wet. Store in a cool, dry location.
2. Diagram 2
2 sections x 6 pieces with blue tape
Insert the 6 piece poles into the top and bottom frame
connectors.
4. Diagram 4
a. Slide the shell body onto the frame and tie strings onto
the bottom poles.
b. Slide the bottom frame into the pole sleeve on the
bottom of tent body.
c. Attached the floor sheet below tent body by velcro sewn
on the sheet.
Note: Wrinkles in material will straighten out or you can
apply steam to remove wrinkles.
Made by:
YJ USA Corp. DBA Bazoongi
3970 Lindbergh Drive
Addison, TX 75001 U.S.A
1.800.206.5611
www.bazoongi.com