Advertisement
This option allows you to use the standard default mode where the controller runs lights at
night in a "Street lamp" mode, based on light falling on the panel or to power auxiliary
items at all times, regardless of it being day or night.
1F0 Will disable the timers and always power the load
1F3-1F9 will run the lamps for the time specified, with a range of 3 to 9 hours.
Programming Method
Press and hold K2 until the voltage is able to be set.
Press K2 multiple times until [1F3] appears in the display and press K1 to change this to a
longer duration, or set to "1F0" to have the load always output power during the day unless
overloaded, or the battery voltage drops below the cut-off.
IMPORTANT:
Remember to select 9F using K2 and then press K1 to save the setting and reboot the
controller. The following will appear in th
Advertisement
