Page 2
Congratulations We at The Braun Corporation wish to express our fullest appreciation on your new purchase. With you in mind, our skilled craftsmen have de- signed and assembled the finest lift available. This manual includes safety precautions, lift operating instructions, manual operating instructions, and instructions for maintenance and lubrica- tion procedures.
(inboard end) of the platform. Lift operation procedures are identical for all L955 Series lift models. The operating Instruc- tions contained in this manual and appearing on lift-posted operating instructions decals...
(inboard end) of the platform. Dual Handrails: Dual handrails are provided for wheelchair passenger use. The handrails automatically unfold to the deployed position when the platform unfolds and fold auto- matically to the stowed position when the platform folds.
Automatic Roll Stop(s): L955SE and L955U lift platforms are equipped with a cylinder- powered outboard roll stop that provides a ramp for wheelchair loading and unloading at ground level. L955SE platforms are equipped with an outboard roll stop and a side entry roll stop.
Page 8
(vertical position). Floor Level: Floor level is the position (height) the platform assembly reaches in order for the wheelchair passenger to enter and exit the vehicle (fully raised). The platform automati- cally stops at floor level when Page 6...
Safety Symbols SAFETY FIRST! Know That ... All information contained in this manual and supplements (if included), is provided for your safety. Famil- iarity with proper operation instructions as well as proper maintenance procedures are necessary to ensure safe, troublefree operation. Safety precautions are provided to identify potentially hazardous situations and provide instruction...
W ARNING If the lift operating instructions, manual operating instructions and/or lift operation safety precautions are not fully understood, contact The Braun W ARNING Corporation immedi- ately. Failure to do so W ARNING may result in serious bodily injury and/or W ARNING property damage.
Page 11
Do not operate or board the lift if you or your lift operator are intoxicated. W ARNING Do not raise front wheelchair wheels (pull wheelie) when loading (boarding) the platform. W ARNING Open lift door(s) fully and secure before operating lift.
Page 12
(lowered fully) and the outboard roll stop is fully unfolded (ramp position) before loading or unloading a passenger at ground level. Outboard platform roll stops must be fully unfolded (ramp position) until the entire wheelchair crosses roll stops when loading or unloading at ground level.
Page 13
Keep this operator's manual in lift-mounted manual storage pouch when not in use. W ARNING Never modify (alter) a Braun Corporation lift. W ARNING Do not use accessory devices not authorized by The Braun Corporation. W ARNING Do not remove any guards or covers. W ARNING Keep clear of any hydraulic leak.
Pre-Lift Operation Notes and Details Braun L955 Millennium Series lifts W ARNING are consumer oriented (designed to allow operation by the wheelchair Read and become passenger). L955 Series lifts are familiar with all lift typically installed in vehicles operation safety...
Follow all lift operation and wheelchair passen- ger information detailed in this manual. control switches are color-coded and function-labeled to corre- spond to the color coding and...
Page 16
Braun products. Braun control systems are the only control systems authorized for use with Braun products. Do not attempt to interface aftermarket control systems with Braun products. To do so may result in serious bodily injury and/or prop- erty damage.
Pre-Lift Operation Notes and Details Lift Features Bridge Plate: The hinged bridge plate assembly bridges the gap between the lift platform and the vehicle floor when the platform is positioned at floor level. The bridge plate assembly consists of the bridge plate and the bridge plate extension.
Pre-Lift Operation Notes and Details Lift Features (continued) Although the L955 features automatic floor level switching, the lift operator (wheelchair passenger or attendant), must view the platform to be certain the platform is properly posi- tioned at vehicle floor level and...
Page 19
Pre-Lift Operation Notes and Details Outboard Roll Stop: When the platform lowers fully to ground level, the roll stop cylinder compression spring automati- cally unfolds (rotates) the roll stop to the ramp position (fully unfolded). See photos A and B. Although the outboard roll stop is lift-powered, the activation of Fully-Unfolded (Ramp position) Roll Stops...
Pre-Lift Operation Notes and Details Lift Features (continued) driven roll stop is powered by the roll stop cylinder to auto- matically fold (rotate) to the vertical position when the UP switch is activated. W ARNING Discontinue lift use immediately if any lift component does not operate properly.
(ramp position). Note: The roll stops must be fully unfolded until the entire wheelchair has crossed the roll stops when loading or unloading at ground level. Discontinue lift opera-...
Pre-Lift Operation Notes and Details Wheelchair-Equipped Occupant Seat Belts The Braun Corporation recom- mends wheelchair passengers position and buckle their wheel- W ARNING Position and secure (buckle, engage, fasten, etc.) the wheelchair-equipped occupant seat belt before loading onto the wheelchair lift platform.
(applicable for your use based on your physical abilities and the physical characteristics of your personal wheelchair). Become familiar with the proper operation of your lift before operating the lift by yourself.
Page 25
Pre-Lift Operation Notes and Details nance and lubrication proce- dures. Preventive maintenance visual inspections do not take the W ARNING Maintenance and lubrication proce- dures must be per- formed by authorized service personnel as specified in the applicable installa- tion/service manual. Failure to do so may result in serious bodily injury and/or...
If this information is not fully understood, contact The Braun Corporation immedi- ately. Failure to do so may result in serious bodily injury and/or property damage. Page 24...
Page 27
Lift Operating Instructions To Open Door(s): Automatic Door Operator(s): Manual Door(s): To Unfold Platform (Out): Press yellow OPEN switch until door(s) are fully open. Release switch. Manually open door(s) fully and secure. Press orange OUT switch until platform stops (unfolds fully – reaches floor level).
Page 28
Page 26 To Unload Passenger: 1. Read notes below! Load passen- ger onto platform facing outward and lock wheelchair brakes. Note: Roll stops must be UP and roll stop latch must be fully en- gaged before loading passenger onto platform. Lower head to clear vehicle door jamb header.
Page 29
Lift Operating Instructions To Unload Passenger: 3. Unlock wheelchair brakes and (continued) unload passenger from platform. Note: Roll stops must be fully unfolded (ramp position) until the entire wheelchair has crossed the roll stop. See Photos K and L. Page 27...
Page 30
Note: Roll stops must be fully unfolded (ramp position) until the entire wheelchair has crossed the roll stop. See Photos K and L. 2. Press red UP switch until platform stops (reaches floor level). Re- lease switch.
Page 31
Lift Operating Instructions 3. Unlock wheelchair brakes and load To Fold Platform (In): To Load Passenger (continued): passenger from platform into vehicle. Note: Lower head to clear door jamb header. Press orange IN switch until platform stops (fully folded). Release switch.
Lift Operating Instructions Automatic Door Operator(s): Manual Door(s): Page 30 To Close Door(s): Press yellow CLOSE switch until door(s) are fully closed. Release switch. Manually close door(s) fully.
If you experience power or equip- ment failure, refer to the Manual Operating Instructions to operate the lift. Instructions and photos are provided for all steps that differ WARNING Contact The Braun Corporation before adjusting hydraulic pressure relief valve. Failure to do so may result...
Page 34
Manual Operating Instructions Refer to photos and illustration of release valve on previous page. Hand Pump Handle Page 32 To Unfold Platform (Out): Using hand pump handle (Photo B): a. Place slotted end of pump handle onto back-up pump release valve and turn counterclockwise (open —...
Page 35
Manual Operating Instructions Refer to photos and illustration of release valve on page 31. Open Close (Down) (Up/Stop) • To Fold Roll Stop: • To Raise Platform: Using hand pump handle: a. Place slotted end of pump handle onto back-up pump release valve and turn clockwise to close securely.
WARNING Contact The Braun Corporation before adjusting hydraulic Lift installation and servicing prohibited by anyone who has not been certified by The Braun pressure relief valve. Failure to Corporation Sales and Service School. Certified do so may result service technicians should call 1-800-THE LIFT in serious bodily to receive applicable installation/service manual.
Inspect your lift for any missing or worn antiskid. Order as needed. W ARNING Note: Clean surfaces with isopropyl alcohol before decal or antiskid Replace missing or worn antiskid. application. Use a clean Failure to do so may cloth or paper towels. result in serious Do not use oily shop bodily injury and/or...
The L955 has been designed with many self-lubricating compo- nents. Lubricate the pivot points specified on page 37 approxi- mately every four weeks (or 100 cycles) with a light penetrating type oil (30 weight or equivalent).
N CO Maintenance and Lubrication L NU Note: LPS2 General Purpose Penetrating Oil is available in eleven ounce aerosol cans from The Braun Corporation (part number 15807). Note: Clean lubrication points before applying lubricants. Roll Stop Latch (pivot and slide points) Note: Disregard references to components not present.
NAME ADDRESS CITY TELEPHONE STATE TO VALIDATE WARRANTY REGISTRATION CARDS MUST BE RETURNED TO THE BRAUN CORPORATION. Sample Warranty/Registration Card Page 38 cards. The consumer must fill out the other card and mail it to The Braun Corporation. The warranty is provided on the back cover of this manual.
Warranty and Registration Instructions Model No. Series No. Serial No. Pump Code Cylinder Code Date of Manufacture Note: Retain this information for future use. You must have this information when filing a warranty claim or ordering Page 39...
Page 42
"Providing Access to the World" ® Over 300 Braun Dealers Worldwide...