Welch Allyn 49003 Quick Start Manual

Welch Allyn 49003 Quick Start Manual

Halogen headlight with wall mounted power supply

Advertisement

NO. 49003
HALOGEN
with Wall Mounted Power Supply
Thank you for purchasing this modern, convenient halogen headlight.
This manual provides specifications and instructions for use and main-
tenance, enabling you to fully enjoy the benefits offered by this headlight
over a long period of time.
EADLIGHT
Welch Allyn
State Street Road
Skaneateles Falls, NY 13153-0220 U.S.A.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 49003 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Welch Allyn 49003

  • Page 1 NO. 49003 HALOGEN EADLIGHT with Wall Mounted Power Supply Thank you for purchasing this modern, convenient halogen headlight. This manual provides specifications and instructions for use and main- tenance, enabling you to fully enjoy the benefits offered by this headlight over a long period of time.
  • Page 2 MOUNTING Fasten mounting plate to wall or other surface with screws supplied. The two holes in the mounting plate should be vertical and flush with the wall. The wide end of the plate should be down. Slide power source into mounting plate from above, being sure tabs on unit engage tabs on mounting plate.
  • Page 3 OPERATION “QUICK DETACH” - m connector/switch 1 1 F t . C o r d t o H e a d l i g h t CAUTION: NOT FOR USE IN THE PRESENCE OF FLAMMABLE ANESTHETICS. controls spot size...
  • Page 4 OPERATING INSTRUCTIONS The headlight is attached to the power source cord by a “Quick Detach” connector/switch provided on the headband. This con- nector will accept only the 490 Series Headlights. Correct headband size is obtained by use of headband adjust- ment screw.
  • Page 5 120 V., 50-60 Hz, .19 amp. (220-250 V., 50-60 Hz also available) Output 7.2 V. ~3% at transformer-6.3 V. AC, 2.1 amp. at lamp Lamp Welch Allyn No. 02600 (Average life 100 hrs.) Fuse .3 amp. Slo-Blow--Factory Replacement Required Power Cord No.
  • Page 6 For repairs, send complete unit (headlight and power source) to: WELCH ALLYN, INC., Technical Services, 4341 State St. Rd. Skaneateles Falls, NY 13153-0220 Printed in U.S.A. Part No. 490081-2...

Table of Contents