Instructions - Weston 68-0201-W Manual

INSTRUCTIONS

Electrical Shock Hazard. Before cleaning, assembling, or
w WARNING
disassembling the appliance, make sure the plug is removed
from the outlet/power source.
The Boot & Shoe Dryer is ideal for drying boots and shoes of all kinds safely,
silently and thoroughly using the latest in Natural Thermal Convection Heat
Technology.
By following the instructions, the Boot & Shoe Dryer will dry literally any boots,
shoes or gloves, child or adult, rubber, cloth, plastic or leather QUICKLY AND
EASILY!
1. Assemble the base by sliding the front of the
base into the notches on the rear of the base. On
the underside of the base, apply slight pressure to
the tab to lock into place. (FIGURE 1)
2. Position the One Piece Base on a level surface.
Choose an area that is close to an electrical
outlet.
3. Place the Footwear Extensions on to the top
of the Drying Posts. Make sure each Footwear
Extension is fully inserted down onto the Drying
Posts.
4. Place the wet footwear upside-down over the Footwear Extensions.
5. Turn the Boot & Shoe Dryer ON by connecting the Power Cord to a
standard electrical outlet. To turn the Boot & Shoe Dryer OFF, simply
disconnect the Power Cord from the electrical outlet.
NOTE: As a result of using natural convection with no moving parts or forced
air, there will be no indication that the Boot & Shoe Dryer is ON. The only
proof the Boot & Shoe Dryer has been operating is warm, dry footwear!
FIGURE 1
5