Alu-Cab TELESCOPIC LADDER Instructions

Advertisement

ALU-CAB TELESCOPIC LADDER INSTRUCTIONS
How to use the Alu-Cab telescopic ladder
When opening up your telescopic ladder, you can follow these steps:
1. Release the strap securing the retracted ladder.
2. Position the ladder in an upright orientation ready for use.
3. Step on the bottom rung to hold the ladder firmly in place.
4. Pull up each rung to its full extension and ensure that the locking mechanism is
engaged before trying to extend the next rung. You will hear it lock in place.
5. Repeat this for several steps until you reach the desired height.
6. Once all desired rungs are open and secured in place, the ladder is now safe to use.
1. Slot the ladder into the catch to secure
WWW.ALU-CAB.COM
2. Ensure that you secure the ladder with
the anti-luce as shown
Enquiries:
Tel: +27 21 703 3028
queries@alu-cab.co.za
page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TELESCOPIC LADDER and is the answer not in the manual?

Questions and answers

Summary of Contents for Alu-Cab TELESCOPIC LADDER

  • Page 1 ALU-CAB TELESCOPIC LADDER INSTRUCTIONS How to use the Alu-Cab telescopic ladder When opening up your telescopic ladder, you can follow these steps: 1. Release the strap securing the retracted ladder. 2. Position the ladder in an upright orientation ready for use.
  • Page 2 CAUTION! The following steps should be followed when folding your telescopic ladder after use. 1. Hold the ladder by the couplings beneath the rung and ensure the latches are active. 2. Place your thumb on the lock buttons you want to exclude with the rest of your hand placed under the coupling - Putting the rest of your hand over the locking mechanism may result in it being stuck.

Table of Contents