Do you have a question about the BTH-110 and is the answer not in the manual?
Questions and answers
Summary of Contents for Polder BTH-110
Page 1
BTH-110 DUO SHOWER CURTAIN ROD & TOWEL RACK Fits a standard 5 ft. bath tub, safely extend to 63 in. (5 ft. 3 in.) & can withstand a weight of up to 16 lbs. PLEASE READ THROUGH ENTIRE INSTRUCTION BOOKLET BEFORE ATTEMPTING TO INSTALL THIS PRODUCT...
Page 2
14. While holding one end in place extend the rod until it slides into the adjacent end cap. Tighten by positioning one hand on each half of the rod and twisting the smaller diameter rod counter-clockwise. Repeat for both rods. (see image above). BTH-110 Polder inc. 8 Slater Street, Port Chester, NY 10573 800-431-2133 • info@polder.com • www.polder.com Made in China. Fabriqué en Chine. Hecho en China.
Page 3
4. Push the rear end of the locking mechanism all the way into the larger tube and pull the small diameter rod through a short distance. Replace the plastic ring and then the inner caps and you are ready to continue installation. BTH-110 Polder inc. 8 Slater Street, Port Chester, NY 10573 800-431-2133 • info@polder.com • www.polder.com Made in China. Fabriqué en Chine. Hecho en China.
Need help?
Do you have a question about the BTH-110 and is the answer not in the manual?
Questions and answers