Summary of Contents for Full Gauge Controls Sitrad INBOX
- Page 1 Supervisory HDMI Serial Ethernet Wi-Fi Server system communication +55 [51] 3475-3308 I www.fullgauge.com.br...
-
Page 2: Table Of Contents
4. TECHNICAL SPECIFICATIONS......................................25 5. INDICATORS AND BUTTONS......................................26 6. SIGNALS...............................................26 7. CONNECTING TO THE CONTROLLERS.....................................26 8. REMOTELY CONNECTING THE SITRAD PRO...................................28 9. SETTING UP THE SITRAD INBOX.......................................31 10. INTERCONNECTING CONTROLLERS AND SITRAD INBOX............................40 11. ANNEXES - REFERENCE IMAGES....................................42 12. INTERFACE INSTALLATION.......................................43 13. WARRANTY............................................44 GLOSSARY HOTSPOT : The name of a particular location where a wireless network (Wi-Fi technology) is available for use. -
Page 3: Description
- Only use Full Gauge Control’s original accessories; - If you have any questions, please contact our technical support. DUE TO ITS CONTINUOUS DEVELOPMENT, FULL GAUGE CONTROLS RESERVES THE RIGHT TO CHANGE INFORMATION CONTAINED IN THIS MANUAL AT ANY TIME, WITHOUT PRIOR NOTICE. -
Page 4: Indicators And Buttons
5. INDICATORS AND BUTTONS Ethernet RS-485 network reception indication LED RS-485 network transmission indication LED Status LED Power LED Reset Button Power Button Power supply HDMI Output Communication network with RS-485 instruments Audio output (Not available) 6. SIGNALS POWER LED / State STATUS LED / State TX / RX Occurrence... - Page 5 7.1 - Wi-Fi : Wi-Fi converters (TCP-485 Wi-Fi and TCP-485 Wi-Fi Log) can be accessed through the inbox in two ways: inbox (without a Wi-Fi router). - Hotspot on : Converters can be configured to connect to the Wi-Fi network provided by the Sitrad inbox accesses these - Hotspot off : Converters are configured to connect to an existing Wi-Fi network (with a Wi--Fi router), and the...
-
Page 6: Remotely Connecting The Sitrad Pro
Pro software installed. If the network being used is in DHCP mode, please follow steps 8.8 and 8.9 of the section ‘’Registering the Sitrad inbox server’’. inbox network parameters according to - When the network used is not in DHCP mode, please contact your network administrator and configure the item 9.4 (Ethernet). - Page 7 8.3 - Click ‘’Server registration’’ to display the two server registration options. It is advisable that you use the ‘’Search automatically’’ option, as the IP settings inbox and will be filled in automatically if the Sitrad Sitrad Pro are using the same network. For more advanced settings, use the ‘’Register new server’’ option.
- Page 8 8.5 - A window to register the chosen server will appear. In the ‘’Name’’ field, enter the chosen identification for your product. The ‘’IP Address’’ will be filled in automatically (when it is an automatic search). Otherwise, the user should fill in this field with the IP address of the server he/she wants to be connected to. Fill in the ‘’City’’...
-
Page 9: Setting Up The Sitrad Inbox
9. SETTING UP THE SITRAD INBOX inbox settings page can be accessed directly or remotely. It consists of an application for adjusting the system’s general operating 9.1 - The sitrad parameters. It allows users to change date and time, network parameters, data backup and system upgrades, among other features. - Page 10 Sitrad trad inbox is connected to the Internet. IMPORTANT: The user must ensure that the computer that is registering the Sitrad Producto not registered Welcome to the Sitrad InBox Producto not registered Register Register Producto not registered Register Merely illustrative images 9.2.1 - The first step of the registration is to provide a valid email address and then click ‘’Next’’.
- Page 11 9.2.2 - If the user is not yet registered, they must fill in the fields with their current information. Click ‘’Next’’. Welcome to the Sitrad InBox Producto not registered Register Merely illustrative images 9.2.3- At the end of the process, click ‘’Register’’. The ‘’Next’’ and ‘’Register’’ buttons are available only if the data entered is valid.
- Page 12 9.2.4- At the end of the process, the ‘’registration successful’’ screen will be displayed. Welcome to the Sitrad InBox Producto registered Merely illustrative images inbox will display the message ‘’Product registered’’. Unless the product is reset, it will not be possible to...
- Page 13 inbox 9.4 - On the ‘’Ethernet’’ tab, you can configure the network parameters by choosing dynamic (DHCP) or static mode. In the dynamic mode, the automatically obtains the network settings if the network is configured to provide IP through the DHCP protocol. To configure the static mode, please contact your network administrator.
- Page 14 inbox automatically adjusts the date and 9.6 - The ‘’Proxy’’ settings are required for networks that uses a Proxy server for Internet access, as the Sitrad time and searches for software updates online. These settings must be made by the user’s network administrator. Click Save. Merely illustrative images 9.7 - The ‘’Service’’...
- Page 15 9.8- On the ‘’Backup’’ tab, users can create a backup copy of the service database by clicking Create Backup. Preferentially, the backup created should be stored on removable memory devices (USB flash drive, external HDD, etc.). If there is more than one device connected, the program will switch to the one with the most available memory;...
- Page 16 inbox and gives the user the option to restart the inbox. 9.9 - The maintenance screen indicates the total percentage of memory used by Merely illustrative images 9.10 - In the ‘’Logs’’ screen the user has access to the files where all the actions within the system are registered. Divided by tabs: Configuration, Sitrad Service and Operating System.
- Page 17 Settings Server settings Users. Sitrad Inbox Merely illustrative images 9.11.1 - Click the ‘’Users’’ field to display the user list screen. This screen allows users to search, add, edit and delete users. Only users with Super admin inbox settings page.
-
Page 18: Interconnecting Controllers And Sitrad Inbox
10. INTERCONNECTING CONTROLLERS AND SITRAD INBOX Merely illustrative images MT-530 super MT-530 super 10.1 FOR A ROBUST ELECTRICAL INSTALLATION, OBSERVE THE FOLLOWING RECOMMENDATIONS: - Use a 2-way cable, minimum 24 AWG; - Preferably, use cables with mesh shielding to protect the communication line from outside interference;... - Page 19 10.2 RECOMMENDED TOPOLOGIES: - Use one of the following arrangements to create a well-defined path Ceiling Ceiling CONVERTER RS-485 MT-530 super MT-530 super MT-530 super MT-530 super CORRECT 10.3 TOPOLOGIES NOT RECOMMENDED - Avoid creating long network branches. MT-530 super MT-530 super CONVERTER...
-
Page 20: Annexes - Reference Images
- Do not ground the controllers separately. INCORRECT MT-530 super MT-530 super super MT-530 - Ground the cable shield at one point only, preferably near the interface. CORRECT super super MT-530 MT-530 MT-530 super 10.5 IMPORTANT According to chapters of NBR 5410 standard: 1. -
Page 21: Interface Installation
12. INTERFACE INSTALLATION 12.1 FASTENING WITH SCREWS 12.1.1 - To attach the interface next to the monitor or to the wall, use the VESA fastening system with a 75 mm dimension. The screw used must be: M4 cylindrical head (slotted or Philips) at least 8 mm long. 12.1.2 - After positioning the interface, push it down to secure it. -
Page 22: Warranty
After this said year before the reseller network, the warranty shall continue to be valid if the instrument is sent directly to Full Gauge Controls. The products are warranted in case of defects in workmanship, making them unsuitable or inadequate for their intended applications.