Advertisement
Quick Links
SUITABLE FOR MODEL
IMAGE MAY VARY FROM ACTUAL PRODUCT
DESCRIPTION
The FSP-211 is a passive infrared (PIR) outdoor sensor that raises or lowers the electric lighting level to high, low or
off based on motion and/or daylight contribution. Typically, once the sensor stops detecting movement and the time
delay elapses, lights will first fade to low mode, and eventually switch off. When motion is detected, the sensor ramps
the light level to high mode unless the daylight contribution is sufficient. The integral photocell can also switch the
lights on and off for dusk to dawn control, so that lighting remains on overnight even without motion detection.This
slim, low-profile sensor is designed for installation inside the bottom of a light fixture body, and is rated for wet and
cold locations.Initial setup and subsequent sensor adjustments are made using a wireless handheld configuration tool
(FSIR- 100). This tool enables adjustment of sensor parameters including high/low mode, sensitivity, time delay, cut
off and more.
The FSIR-100 can read current parameter settings, and stores up to six sensor parameter profiles to speed
commissioning of multiple sensors. (NOTED: FSIR-100 NEEDS TO BUY SEPARATELY WHICH IS NOT
CONTAINED IN MULTI-LEVEL MOTION SENSOR PROVIDED BY ABOVE ALL)
DESCRIPTION
FSP-211 SENSOR MODULE
0.9"
22.86mm
0.65"
16.48mm
Add: 1501 Industrial Way N, Toms River, NJ 08755 Phone: 866-222-8866 E-mail: info@abblighting.com
Web: www.aboveallLighting.com ©2016 ABOVE ALL. Inc. All rights reserved
Programmable Multi-Level Motion Sensor
FSP-211 DIMENSIONS
1.66"
42.18mm
1.38"
3.79"
35.05mm
96.27mm
Instruction Manual
1.63"
41.28mm
Threaded Collar
1.29"
32.77mm
Rubber Gasket
Nut
Lens
Advertisement
Summary of Contents for Above All FSP-211
- Page 1 IMAGE MAY VARY FROM ACTUAL PRODUCT DESCRIPTION The FSP-211 is a passive infrared (PIR) outdoor sensor that raises or lowers the electric lighting level to high, low or off based on motion and/or daylight contribution. Typically, once the sensor stops detecting movement and the time delay elapses, lights will first fade to low mode, and eventually switch off.
- Page 2 Programmable Multi-Level Motion Sensor Instruction Manual ABOVE ALL STANDARD PROGRAMMABLE MULTILEVEL MOTION SENSOR FSP211+FSP L7 Outdoor installation using Setpoint and Photocell features (Above All Default Settings) High Mode ..............10 Volts Low Mode ..............3 Volts Time Delay ..............15 min Cut Off ................
- Page 3 Programmable Multi-Level Motion Sensor Instruction Manual Indoor installation using Setpoint and Photocell features(Above All Default Settings) High Mode ..............10 Volts Low Mode ..............5.0 Volts Time Delay ..............2 min Cut Off ................5 min Sensitivity ............... High Setpoint ................
-
Page 4: Wire Connection
On/Off Adjustable settings can be changed as needed for specific applications. Home/Main Menu Back Left Right/Next Down Select Add: 1501 Industrial Way N, Toms River, NJ 08755 Phone: 866-222-8866 E-mail: info@abblighting.com Web: www.aboveallLighting.com ©2016 ABOVE ALL. Inc. All rights reserved... - Page 5 Ramp Up Time: Time period for light level to increase from LOW to HIGH. Fade Down Time: Time period for light level to decrease from HIGH to LOW. Add: 1501 Industrial Way N, Toms River, NJ 08755 Phone: 866-222-8866 E-mail: info@abblighting.com Web: www.aboveallLighting.com ©2016 ABOVE ALL. Inc. All rights reserved...
-
Page 6: Troubleshooting
FSP-211. After the countdown, FSP-211 will no longer respond to the FSIR-100. If additional configuration is required, cycle the power to the FSP-211 off and then back on. To disable the lock parameter after the power cycle, select Lock Delay, select Disable, and press SEND.