Advertisement
SPECIFICATIONS
Size: 7''(H) x 48''(W) x 28''(D) / 3 Cubic Feet Of Storage / 2.0mm thick
No Fire Rating
2 x 1/2" Steel Bolts
100 Pound Max Weight Capacity
Includes (4) 1.5V AA batteries
BATTERY INSTALLATION
This lock requires (4) 1.5V AA batteries. Under normal use, batteries will last about 1 year. When the
battery is low and you press a button on the keypad, a red light will come on warning you that the battery
is low.
To test the battery, enter your security code. If the batteries are low the red light will come on
momentarily. To replace the battery, remove the cover by pressing the tab and turning the cover as
shown in the illustration above. Replace the old battery and attach the cover back in place.
TROUBLE KEY/OVERRIDE KEY
A "Trouble Key or Override Key" has been included in the event that
you have forgotten or lost your security code. Please record the number
of your key in a safe location in the event the key needs to be replaced
in the future. To open the safe using the trouble key, follow the steps:
1. Remove the cover by taking off the cover as shown in the
illustration.
2. Insert the key in the key hole and turn clockwise 15-20 degrees (until stopped) in order to unlock
the safe, then rotate the knob.
3. Keep the door open until you have entered a new security code. Before entering your new
security code, turn the key back and remove the key and put the cover back in place.
4. Enter your new security code. (DO NOT STORE KEY IN SAFE)
REPLACEMENT TROUBLE KEY/OVERRIDE KEY
Verification of ownership is required in order to receive replacement key. Contact Customer
Service at 1-888-287-6981 to verify registration, then complete the Replacement Form, along with
required Service Fees. The Replacement Form must include the Serial Number and Lock number, and
be notarized by a non-family member.
(Batteries are installed here)
Advertisement
