Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Clare Controls Manuals
  4. Thermostat
  5. Ecobee
  6. Release notes

Clare Controls Ecobee Release Notes

Thermostat driver
Hide thumbs

Advertisement

Quick Links

Download this manual
Ecobee Thermostat Driver
Release Notes
Contents
Introduction ...................................................................................................... 1
Installing the Ecobee thermostat ..................................................................... 2
Connecting the Ecobee thermostat to ClareHome .......................................... 2
Adding the thermostat in ClareHome ............................................................... 3
Pairing and removing the thermostat in FusionPro .......................................... 6
Contact information ....................................................................................... 11
Last modified: 11/19/20

Introduction

The Ecobee line is a set of smart thermostats. The thermostats have been tested
and certified for integration with the ClareHome system.
By integrating the Ecobee thermostat to a ClareHome control system, your
customers can send commands to the thermostat to change its modes, cool and
heat settings, and fan status from their mobile device.
When integrating the thermostat into your ClareHome project, no wires or extra
connections are necessary. Install the Ecobee according to its documentation,
and then connect it directly to home network's Wi-Fi.
The Ecobee thermostat integrates with the ClareHome system in a way similar to
existing HVAC drivers. All HVAC drivers share a common UI to keep user
experiences consistent.
Supported models: All Ecobee thermostats are supported with this driver.
DOC ID - 1998 • Rev 01
1 / 11

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ecobee and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Clare Controls Ecobee

Summary of Contents for Clare Controls Ecobee

  • Page 1: Table Of Contents

    Contact information ..................11 Last modified: 11/19/20 Introduction The Ecobee line is a set of smart thermostats. The thermostats have been tested and certified for integration with the ClareHome system. By integrating the Ecobee thermostat to a ClareHome control system, your customers can send commands to the thermostat to change its modes, cool and heat settings, and fan status from their mobile device.

  • Page 2: Installing The Ecobee Thermostat

    ClareHome. Connecting the Ecobee thermostat to ClareHome Use the Ecobee app. Once the app is installed, follow the displayed on-screen instructions for thermostat and account setup. DOC ID - 1998 • Rev 01...

  • Page 3: Adding The Thermostat In Clarehome

    Adding the thermostat in ClareHome Once you have installed and setup the thermostat using the Ecobee app, add and configure it with the ClareHome app. Notes • The Ecobee thermostat and ClareOne panel (or CLIQ.mini/host) must be connected to the internet to complete this process. The Ecobee cannot be added when a CLIQ.mini is in AP mode.
  • Page 4 3. Tap Add Devices. 4. Select the device category, Climate. 5. Tap Ecobee – Ecobee Thermostats. 6. Read the displayed Device Authorization message, and then tap Authorize Device. The Ecobee Authorize App page displays. DOC ID - 1998 • Rev 01...
  • Page 5 7. Enter the homeowner’s Ecobee account login credentials, and then tap Log You are prompted to authorize ClareHome access to the Ecobee thermostat(s). 8. Tap Accept. DOC ID - 1998 • Rev 01 5 / 11...

  • Page 6: Pairing And Removing The Thermostat In Fusionpro

    All Ecobee thermostats connected to the account are added to the ClareHome account. 9. Tap Return to Device List. Note: For scenes, notifications, schedules, and automations configuration, ClareHome App Guide (DOC ID 1750). Pairing and removing the thermostat in FusionPro Pair the thermostat to the project.
  • Page 7 The Account sub-menu is now available. 3. Click the Devices tab, and then click Add Devices. 4. Select the device category (Climate). DOC ID - 1998 • Rev 01 7 / 11...
  • Page 8 5. Click Ecobee – Ecobee Thermostats. 6. Click Authorize Device. The Ecobee Authorize App page displays. DOC ID - 1998 • Rev 01 8 / 11...
  • Page 9 7. Login with the homeowner’s Ecobee credentials, and then click Accept. 8. Once accepted, you are returned to FusionPro. Note: For scenes, notifications, schedules, and automations configuration, ClareHome App Guide (DOC ID 1750). To remove the thermostat with FusionPro: If the Ecobee devices are removed, the homeowner’s Ecobee account Note: information is required to re-add the Ecobee devices.
  • Page 10 2. Locate the desired account in the list, and then click View. The Account sub-menu is now available. 3. Click the Devices tab, and then click Delete next to the desired device. 4. Click Delete to confirm. DOC ID - 1998 • Rev 01 10 / 11...

  • Page 11: Contact Information

    Contact information Clare Controls, LLC. 7519 Pennsylvania Ave, Suite 104 Sarasota, FL 34243 General: 941.328.3991 Fax: 941.870.9646 www.clarecontrols.com Integrator/Dealer Support: 941.404.1072 claresupport@clarecontrols.com Homeowner Support (ClareCare): 941.315.2273 (CARE) help@clarecontrols.com DOC ID - 1998 • Rev 01 11 / 11...