Download Print this page
Swereco REKO SOFT 142005 Instructions For Use

Swereco REKO SOFT 142005 Instructions For Use

Advertisement

Quick Links

SHOWER CHAIR REKO SOFT,
ADJUSTABLE
Intended Use: Shower chair Reko Soft is designed
to use in the shower. The chair has a stable, fully
welded construction and has arm supports to
facilitate getting up. The seat is soft and heat
insulated. Backrest is available as an accessory
and can be ordered separately from Swereco.
Safety Instructions:
This product must only be used for its intended purpose.
The chair is not intended for use in a bathtub.
The chair must be placed on a flat surface with all four legs firmly on the ground.
The chair must not be angled in such a position that it only stands on two legs when the user is
sitting on it. Maximum user weight is calculated with all four legs on the floor.
The chair must not be moved while the user is sitting on it.
The rubber tips must be checked regularly. Damaged or worn tips could cause deteriorated grip
on the floor and should be replaced. These can be ordered through Swereco.
If the chair is set in a slight forward-leaning position, the maximum height difference between the
front and rear legs may not exceed 2,5 cm, which corresponds to one step on the height
adjustment of the legs.
Before use, make sure the clips for height adjustment are securely fastened.
If replacing clips, make sure they are the correct size, 25 mm (different sizes available).
In the event of signs of wear in the height adjustment or that the product is otherwise worn out,
the chair should be taken out of use and sent in for service.
When using a backrest, make sure it is correctly assembled.
Symbols: Explanation of the symbols on the
product and in the Instructions for Use
Maximum user weight
Can be washed with
alkaline soap solution, pH
5-9.
Wash at a maximum of
85°C for 3 minutes.
Visual control
Product complies with EU
directive 93/42/EEG and
2007/47/EG on medical
devices
2021_03
Instructions for Usee
Article number: 142005, 141990
142181
142005
Technical specification
Art nr: 142005
Vuxen
Seat depth: 34 cm
Seat width: 47 cm
Weight: 4,9 kg
Height: 45-55 cm
Material: Steel tubes,
PUR (seat), TPE
(rubber tips)
Max 150 kg
Manufactured by:
Swereco AB
Vagnvägen 4
SE-364 42 Lenhovda
SWEDEN
Tel: +46 (0)8 5000 5240
www.swereco.com
info@swereco.com
141990
Art nr: 141990
Barn
Seat depth: 22 cm
Seat width: 38 cm
Weight: 3,4 kg
Height: 35-45 cm
Material: Steel tubes,
PUR (seat), TPE
(rubber tips)
Max 70 kg
e
1/2

Advertisement

loading
Need help?

Need help?

Do you have a question about the REKO SOFT 142005 and is the answer not in the manual?

Questions and answers

Summary of Contents for Swereco REKO SOFT 142005

  • Page 1 • The rubber tips must be checked regularly. Damaged or worn tips could cause deteriorated grip on the floor and should be replaced. These can be ordered through Swereco. • If the chair is set in a slight forward-leaning position, the maximum height difference between the front and rear legs may not exceed 2,5 cm, which corresponds to one step on the height adjustment of the legs.
  • Page 2 Secure the backrest with screw and nut as shown. 142005 + 142050 www.swereco.com info@swereco.com 2021_03...

This manual is also suitable for:

Reko soft 141990