Installation - Buffalo CY265 Instruction Manual

Bbq griddle
Table of Contents

Advertisement

Introduction
Please take a few minutes to carefully read through this manual. Correct maintenance and operation
of this appliance will provide the best possible performance from your BUFFALO product.
BUFFALO prides itself on quality and service, ensuring that at the time of unpacking the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.

Installation

Selecting a location
This appliance is for outdoor use only and should be placed in a well-ventilated area.
The sides of the barbecue should NEVER be closer than 1 metre from any combustible surface,
including trees and fences and make sure that there are no heat sources nearby (cigarettes, open
flames, spark etc.). Keep away from any flammable materials!
Choosing the suitable gas cylinder and regulator
This barbecue can use either propane or butane or propane/butane mixed LPG (liquid petroleum gas)
bottled gas. Propane bottles, will supply gas all year round, even on cold winter days. Butane bottles will
supply sufficient gas in summer, but it may affect the performance of the barbecue and restrict the heat
output available from the burners, particularly once the gas temperature starts to fall below +10°C.
You will need LPG gas bottle and proper regulators under the gas pressure to operate this gas griddle.
Choose the proper regulator according to the appliance category and gas pressure, for example, use
37mbar regulator with appliance category I3+ for propane gas.
Country of Destination
BE, CH, CY, CZ, ES,
FR, GB, GR, IE, IT, LT,
LU, LV, PT, SK, SI
Note: Marking on injector, for example, 0.98 indicates that
the size of the injector is 0.98mm.
Warning! Ensure to have the proper regulator and cylinder in order for the
barbecue to operate safely and efficiently. Use of an incorrect or faulty regulator
is dangerous and will invalidate any warranty. Consult your local gas dealer for
the most suitable gas cylinders and regulators.
Connecting the gas hose to the griddle and the regulator
Caution!
Before connection, ensure all the control switches of the griddle are at the
OFF position.
Ensure the hose to be used is of 8-10mm diameter and no more than 1.5m long.
Change the hose every 2 years, or upon necessity.
We suggest wearing gloves when assembling the hose.
CY265_UK_A5_v1_20191121.indb 5
Appliance Category
Butane(G30) 28-30 mbar
X
I3+(28-30/37)
Propane(G31) 37 mbar
Main Burner
Gas and Supply
Pressure
Injector Size Ø
UK
0.98mm
0.98mm
2531
5
2019/11/21 15:19

Advertisement

Table of Contents
loading

Table of Contents